Konica Minolta 7013 manual Installing the printing supplies

Getting started

Installing the printing supplies

Your fax prints incoming faxes and copies with a reliable 600 dpi print engine. Your fax requires two types of printing supplies (sometimes also called consumables):

•The drum cartridge — It yields 20,000 “normal” A4-sized printouts (see “Specifications,” page AI.2). By “normal,” we’re referring to the amount of text and/or graphics on each page. This is based on an industry-standard test docu- ment.

•The toner cartridge — It yields 16,000 “normal”, A4-sized printouts (see “Specifications,” page AI.2).

Note: The toner cartridge included with your machine is starter toner cartridge, which yields 3,000 printouts. Please purchase regular, full-yield toner car- tridge from your authorized Konica dealer.

To install these supplies:

Important: Gently close the top cover so that you don’t catch your hands, possibly injuring them.

1 Pull up the top cover release and open the top cover.

2 Slide the printer cover release and open the printer cover.

3 Unpack a new toner cartridge from its carton. Then, holding the toner car- tridge with both hands, slowly shake it to distribute the toner evenly inside the cartridge.

Note: Do not touch the roller of the toner cartridge.

4 Gently install the toner cartridge in the printer, making sure the toner car- tridge’s two pins fit in the slits inside the printer frame.

5 Unpack the drum cartridge from its carton.

Note: Shield the drum cartridge from light, especially strong light. Later, if you have to remove the cartridge from the machine, immediately wrap it in a thick cloth to protect it from light.

6 Gently install the drum cartridge in the printer, making sure the drum cartridge’s four pins fit in the slits inside the printer frame.

1.6