Konica Minolta 7013 manual Printing a delayed command list, Printing a stored document

Basic operation

3 If you want to cancel the command shown, press CANCEL. The LCD shows:

C01:9-5552311

Check / / /Cancel

4 To go ahead with canceling the command, press CANCEL again. Go back to step 2 to view other delayed commands.

To keep this command but to continue reviewing stored commands, press or . Go back to step 2.

To keep this command and stop reviewing commands, press STOP to return your machine to standby mode.

Note: See also “Reviewing or canceling parts of a broadcast,” below.

Reviewing or canceling parts of a broadcast

You also can review or cancel certain numbers within a broadcast:

1	Press COMM. CANCEL/CONFIRM.
2	Press		or	to scroll through currently stored broadcast command.
	Note: Stop this operation at any time by pressing STOP.
		C01:Broadcast
				/ / /Cancel
3
	If you want to cancel the command shown, press CANCEL, CANCEL.
	If you want to review individual numbers within this broadcast, go on to
	step 4 without pressing CANCEL.
4	To review individual numbers within this broadcast, press (or BROADCAST)
	to see the first number. The LCD shows:
		9-5550388
				/ / /Cancel
5
	Press		or	until you find the number you want to cancel.
6	Press CANCEL, CANCEL. The next number will appear.

If you want to cancel this number, also, repeat this step.

If you want to cancel a different number, go back to step 5.

If you want to go back to reviewing or canceling other command, press .

If you don’t want to cancel any more numbers, press STOP. The machine returns to standby mode.

Printing a delayed command list

Your machine can print a command list which tells you:

•The command’s identification number

•The phone number, or “remote location”

•The start time (this appears in a DD,HH:MM format)

•A “note” telling if the command is a polling or F-Codeoperation (see pages 3.14–3.15 for more on polling and 3.25–3.34 for more on F-Code communication).

To print a delayed command list, press Program key, E, 1, 0, 5 ENTER.

Printing a stored document

Your fax machine can print out each document stored for delayed transmission. To print a stored document, you’ll need to know the document’s command number, which you can get by either reviewing the commands or printing a delayed com- mand list (see above).

1	Press Program key, D, 3, 0, 5 ENTER. The LCD shows:
		Com. Stored Doc.
		Command No.	:_
2
	Use the numeric keypad to enter the command’s identification number, 1–99.
	For example, we could enter the following for the very first command, 1:
		Com. Stored Doc.
		Command No.	:1_
3
	Press ENTER. Your fax machine will print a copy of the stored document.

2.8