Konica Minolta 7013 manual Cursor Keys, Copy mode, While scanning a document

25 Printer status lights — Green lights indicate the acceptable paper sources.

Red light will glow if the printer problem (such as paper jam) occurred.

26 CONTRAST — Pressing this key will adjust the contrast level.

16 Numeric keypad — Just like the numeric keys on a regular tone-dialing phone. Use these to dial phone and fax numbers and to enter numbers when you’re setting up the machine.

17 In Fax mode:

SPEED DIAL/TEL INDEX — Starts a speed-dialingoperation, which you finish by pushing three of the keys on the numeric keypad. Also displays one-touchand speed-dial entries sorted alphanumerically, as in a telephone directory. (See page 3.8.)

Or, in Copy mode:

ZOOM – Pressing this key will turn on or off the ZOOM light.

When the ZOOM light glows, you can set the copy reproduction ratio at 1% steps by using or key.

When the ZOOM light is not lit, you can choose one of several fixed copy repro- duction ratio by using or key.

Getting started

27 DOCUMENT/RESOLUTION —

In Fax mode: Pressing this key will toggle among the three resolution modes and grayscale.

Or, in Copy mode: Pressing this key will select the type of your document.

28 COPY/FAX — Pressing this key will toggle between Fax mode and Copy mode.

18	Program key — Any function can be started by first pressing this key and
	then entering the function number.
19	Cursor Keys
	— Scrolls (moves) through features and command options as dis-		29	30	31
	played on the LCD.
20	ENTER — It confirms user settings, begins operations and moves through com-
	mand levels.
21	CANCEL — Pressing this key will delete characters on the LCD and cancel com-
	mands you have entered into the machine.
22	PAPER SIZE/NEXT DOC —
	In Copy mode:
	Selects the printout paper you want to use.
	While scanning a document:		fliptab A		fliptab B	fliptab C
	Pressing this key will tell your machine to scan one or more additional docu-	29	Macro Keys — Programming the Macro keys (M1 and M2) can reduce many
	ments after the current scanning ends.
23	DOCUMENT SIZE — Instructs the fax to scan A4, A5 or F4 sized documents		steps of the operation to a simple press of a key. You can “teach” the Macro
			keys to carry out one of the several operations (see pages 3.17–3.19).
	when you use the platen glass.		Programmable One-Touch Keys — The keys labeled P1 and P2, this lets
24
	Liquid crystal display (LCD) — Shows the machine’s status and lets you	30 you teach your machine an advanced multi-step function just once, then recall
	see what you’re programming into the machine. The display shows 2 lines, 20		the function at any time by pressing one of these keys.
	characters per line. If the LCD is blank, the machine is off.

31 One-Touch Keys — The keys labeled 01-55offer one-touch dialing conve- nience. Also, you may use these keys to enter the characters when you are setting up the machine.

1.4