RT-10

Playback Controls

SELECTING DISC SETTINGS

Some disc menus can be used to select disc settings such as audio track (audio language and output format), subtitle language, and camera angle. In some cases, certain remote control buttons can also be used to select these settings without navigating through the disc menu.

Note:

Condition memory mode (4-10) stores audio language, output format, subtitle language, and camera angle settings for up to 15 DVD-Vs. Once stored, these settings will be automatically recalled whenever the disc is loaded.

AUDIO TRACKS

AUDIO

•Pressing the remote control AUDIO button opens one of the Audio bars shown in the next column, which can be used to select the desired audio track (audio language and output format).

•Audio track selection is available for DVD-Vs, Video CDs, and MP3s recorded with two or more audio tracks. Audio track selection is not available for other disc formats or for discs recorded with one audio track. In addition, audio track selection is not available unless playback is activated.

•DVD-V and Video CD audio tracks include an audio language and output format. MP3 audio tracks include an output format.

•Audio track selection has no effect on the Audio Language parameter (3-37) setting.

To select an audio track:

1.When playback is activated, press the AUDIO button to open one of the Audio bars shown below.

•When a DVD-V or Video CD is loaded, an Audio bar similar to the one shown below will open at the top of the on- screen display, indicating the audio language and output format in which the selected audio track was recorded. For instance, the Audio bar shown below indicates that the selected audio track was recorded in English in 2-channel Dolby Digital format.

 

 

Dolby Digital

Audio

:1 Englih

2CH

 

 

 

•When an MP3 is loaded, one of the Audio bars shown below will open at the top of the on-screen display, indicating the output format in which the selected audio track was recorded – stereo, mono, or 2-channel.

Audio : Stereo

Audio : 1/L

Audio : 2/R

•If the Audio bar does not open at the top of the on-screen display, audio track selection might not be available for the loaded disc.

2.When the Audio bar opens, press the AUDIO button again to cycle through all audio tracks available on the loaded disc. The remote control number buttons can also be used to enter the number of the desired audio track (if known).

. . . Audio Tracks continues on page 4-8

4-7