RT-10

Basic Operation

trigger control, the associated component connected to the RT-10 trigger input connector can be used to activate and deactivate standby mode.

When the RT-10 is powered off, standby mode is automatically deactivated, although the Standby LED remains lit for a few seconds after the RT-10 is powered off. When the RT-10 is powered on, standby mode is also deactivated, even if standby mode was activated when the RT-10 was powered off. The front panel On/Off button cannot be used to activate standby mode.

Note:

Power is still supplied to the RT-10 when standby mode is activated.

3. Disc Drawer & Open/Close Button

Loads and unloads the inserted disc. When the disc drawer is closed, pressing the Open/Close button opens the disc drawer. When the disc drawer is open, pressing the Open/Close button closes the disc drawer. The disc drawer can also be closed with a gentle press against the front of the disc drawer.

When the disc drawer is open, pressing the Play button closes the disc drawer and activates playback from the beginning of the loaded disc. Whenever the disc drawer is closed, the RT-10 attempts to load a disc, even if the disc drawer is empty.

Single-sided discs should be loaded with the label side facing upward and double-sided discs should be loaded with the side intended for playback facing downward. All discs must align with the circular guide inside the disc drawer. Refer to the Loading Discs section that begins on page 4-2 for more infor- mation.

CAUTION The RT-10 is a single-disc player. Do not attempt to insert more than one disc into the disc drawer at one time. This

might cause damage to the RT-10, the discs, or both.

4. Front Panel Display

Provides at-a-glance viewing of status information about the RT-10 and the loaded disc. Refer to the Front Panel Display section that begins on page 2-6 for more information.

5. Display Off Button

Activates and deactivates the front panel display. When the front panel display is activated, pressing the Display Off button deactivates the front panel display and lights the Display Off button LED. When the front panel display is deactivated, pressing the Display Off button activates the front panel display.

The Display Off button LED:

•Lights to indicate that the front panel display is deactivated

•Does not light when the front panel display is activated

•Blinks to indicate that the Advanced Setup menu is open on the front panel display

. . . Front Panel Overview continues on page 2-4

2-3