Lexicon RT-10 Note:, Channel, Output Connector, REAR PANEL OVERVIEW, 27.Channels Indicator, 2. AC Input Connector, 1. Region Code Indicator

Basic Operation

Front Panel Display Indicators (continued from page 2-7)

The numbers in the RT-10 front panel display illustration shown on page 2-6 correspond to the numbered items that continue below.

27.Channels Indicator

Indicates	all audio channels available on the	L	C	R
loaded disc. The table below provides the channel
			LFE
associated with each letter abbreviation.		LS	S	RS
Channel	Output Connector
L	Front Left
C	Center
R	Front Right
LFE*	Subwoofer (Low Frequency Effects)
LS	Surround Left
S	Subwoofer
RS	Surround Right

* LFE information is sent to the Sub analog audio output connector.

28.

Indicates that the RT-10 is receiving a remote control IR command, even when the RT-10 is using the IR IN connector. The RT-10 does not receive remote control commands unless the RT-10 is powered on with the front panel On/Off button.

Lexicon

REAR PANEL OVERVIEW

The RT-10 is manufactured for sale in several different countries. Each version features a rear panel that includes connectors and safety instructions appropriate to that particular region.

Note:

The rear panel shown on the next page includes all possible connectors. However, certain connectors are not included on some versions. These instances are noted in the rear panel connector descriptions that begin below.

1. Region Code Indicator

Indicates the RT-10 region code, which differs from version to version depending on the region of purchase. All DVD-Vs are also marked with a region code, which is often located on the disc packaging. The RT-10 is compatible with discs marked with this same region code or with the ALL region code. The RT-10 is not compatible with discs marked with other region codes.

2. AC Input Connector

Provides power to the RT-10 through the supplied power cord (2 wire, 10 amp, IEC 320). The supplied power cord features the appropriate male-end connector for the region of purchase.

2-8