Getting Started

Lexicon

Disc Compatibility (continued from page 1-7)

DISCS TO AVOID

The RT-10 is compatible with 5-inch (12cm) and 3-inch (8cm) conventional, round discs. Do not attempt to load discs with other size and shape characteristics, such as those shown below. All discs must align with the circular guide inside the disc drawer.

DISC CARE & HANDLING

Discs require special care and handling to ensure optimal performance. Pay particular attention to the bulleted items that begin at the top of the next column and to other precautions that appear throughout this user guide. In particular, refer to the Disc Compatibility section (1-5), the Loading Discs section (4-2), and the Disc Maintenance section (5-16).

DO . . .

•Hold discs at their center hole and outer edges as shown below. Take care not to leave fingerprints, dirt, and scratches on the disc surfaces.

•Load single-sided discs with the label side facing upward and double-sided discs with the side intended for playback facing downward. All loaded discs must align with the circular guide inside the disc drawer.

•Return discs to their cases when not in use. Discs should be stored in an upright position out of direct sunlight and excessive heat, humidity, or cold.

DO NOT . . .

•Write on disc labels or surfaces with ballpoint pens, pencils, and other sharp-tipped writing instruments. Do not glue paper or attach stickers to discs as shown below. Although not as fragile as the recorded side, damage to the label side of the disc can still render the disc unplayable.

CAUTION The RT-10 is a single-disc player. Do not attempt to insert more than one disc in the disc drawer at one time. This might cause

damage to the RT-10, the discs, or both.

Dirty or damaged discs such as those shown below might affect playback performance or damage the RT-10. Do not attempt to load cracked, chipped, scratched, warped, dirty, or otherwise damaged discs in the disc drawer.

1-8