Playback Controls

Lexicon

STORING DISC SETTINGS

CONDITION

MEMO

•Pressing the remote control CONDITION MEMO button activates condition memory mode, which stores preferred disc settings for up to 15 DVD-Vs. Once stored, these settings will be automatically recalled whenever the disc is loaded.

•Preferred disc settings can be stored for DVD-Vs that allow the selection of on-screen display disc menu language, audio track (audio language and output format), subtitle language, camera angle, Video Adjust, or parental security level settings. Preferred disc settings cannot be stored for other disc formats or for DVD-Vs that do not allow at least one of these selections.

•Preferred disc settings cannot be stored for selections the loaded DVD-V does not allow. For instance, if the loaded DVD-V does not allow selection of an on-screen display disc menu language setting, a preferred on-screen display disc menu language setting cannot be stored. However, preferred disc settings can still be stored for other selections the loaded DVD-V allows.

•Preferred disc settings can be stored for up to 15 DVD-Vs. The oldest set of preferred disc settings is automatically deleted when the sixteenth set of preferred disc settings is stored. All preferred disc settings are automatically deleted when factory-default settings are restored.

•Most DVD-Vs include disc menus can be used to select disc settings. In some cases, certain remote control buttons can also be used to select disc settings without navigating through the disc menu. Refer to page 4-7 to 4-9 for more information.

•Disc menu settings do not affect Setup or Advanced Setup menu parameter settings.

To store preferred disc settings:

1.Make sure a DVD-V that allows selection of on-screen display disc menu language, audio track (audio language and output format), subtitle language, camera angle, Video Adjust, or parental security level settings is loaded.

2.Refer to the Navigating Disc Menus section (4-3) for instructions to select on-screen display disc menu language, audio track (audio language and output format), subtitle language, camera angle, Video Adjust, or parental security level settings.

•In some cases, certain remote control buttons can also be used to select disc settings without navigating through the disc menu. Refer to pages 4-7 to 4-9 for more information.

3.When the desired disc settings have been selected, press the Play button to activate playback.

•Pressing the Play button might not activate playback when the disc menu is open on the on-screen display. If this occurs, press the remote control MENU or TOP MENU button to close the disc menu. Then, press the Play button again to activate playback.

4.When playback is activated, press the CONDITION MEMO button. The Condition Memory bar shown below will open at the top of the on-screen display to indicate that preferred disc settings have been stored for the loaded disc. Once stored, these settings will be automatically recalled whenever the disc is loaded.

Condition Memory

4-10