Setup Menus

Lexicon

Advanced Setup Menu (continued from page 3-51)

To open the Advanced Setup menu:

1.Press the Stop button to activate stop mode. In some cases, the Stop button must be pressed twice in succession to activate stop mode.

2.If the Setup menu is closed, proceed to step 3. If the Setup menu is open, press the remote control Setup button to close the Setup menu. The Advanced Setup menu is not available when the Setup menu is open.

3.When stop mode is activated and the Setup menu is closed, press and hold the SETUP button for about 2 seconds. The front panel Display Off button LED will begin blinking, indicating that the Advanced Setup menu is open on the front panel display.

•When the Advanced Setup menu is open, the DISP_MODE parameter appears on the front panel display as shown on the previous page (first column, first row).

To navigate the Advanced Setup menu:ButtonCommand

ENTER

Selects the highlighted parameter or setting.

 and  Scroll upward and downward through parameters. When a parameter is selected, pressing the  and  arrows scrolls upward and downward through parameter settings.

SETUP

Closes the Advanced Setup menu.

DISP_MODE

DISP_ON, DISP_OFF

Determines the front panel display mode for SACD, CD, and MP3 playback. This parameter setting has no effect when other disc formats are loaded.

Select DISP_ON to deactivate the front panel display and rear panel video output connectors during SACD, CD, and MP3 playback. When SACD, CD, or MP3 playback is activated, press the front panel Display Off button or the remote control DIMMER button to activate the front panel display for 3 seconds. When stop mode is activated, the front panel display remains activated until playback resumes. The video output connectors remain deactivated until the DISP_MODE parameter is set to DISP_OFF.

Select DISP_OFF to activate the front panel display and rear panel video output connectors during SACD, CD, and MP3 playback. The front panel display and rear panel video output connectors will function as normal.

Note:

The DISP_MODE parameter might not function as described with some SACDs, CDs, or MP3s. If this occurs, set the DISP_MODE parameter to DISP_OFF so the front panel display and rear panel video output connectors will function as normal.

AUTO_P

ON_30MIN, OFF

Enables and disables automatic standby mode activation. When ON_30MIN is selected, the RT-10 automatically activates standby mode after 30 minutes of non-use. When OFF is selected, the RT-10 does not automatically activate standby mode after 30 minutes of non-use.

3-52