Lexicon RT-10 Note:, Video Out, Component Video, When Progressive is selected:, •Progressive-scancomponent video output is only available for NTSC discs

RT-10

Setup Menus

Audio1	A2	Video1	V2	Language		General
		TV Screen		--- 16:9 (Wide)
Component Video					Progressive
		Video Out			Interlace
	S-Video Out			--- S2
	Frame Search			--- Off
	Screen Saver			--- Off
	Move					SETUP	Exit

Component Video Progressive, Interlace

Controls component video output format when the RT-10 is using the component video output connectors. Select Progressive if the associated display device provides a progressive-scan component video input connector. Select Interlace if the associated display device does not provide a progressive-scan component video input connector.

When Progressive is selected:

•The picture might appear stretched on the associated display device screen if a video source recorded in 4:3 format is present and the RT-10 or the display device is configured for a 16:9 aspect ratio. To correct this, configure the RT-10 or the display device for a 4:3 aspect ratio. Refer to the TV Screen parameter description on page 3-25 and the table on pages 3-25 and 3-26 for more information.

•The picture will not appear on the associated display device screen if the display device does not provide a progressive-scan component video input connector. To correct this, set the Component Video parameter to Interlace and configure the RT-10 for a different video output connection to the display device.

Audio1	A2	Video1	V2	Language		General
		TV Screen		--- 16:9 (Wide)
Component Video				--- Progressive
		Video Out			Video
	S-Video Out				S-Video
	Frame Search				RGB
	Screen Saver			--- Off
	Move					SETUP	Exit

•The RT-10 converts video sources recorded on film to 60 frames-per-second to create a more natural picture. Refer to the Pure Cinema parameter description on page 3-30 for more information.

•Progressive-scan component video output is only available for NTSC discs.

Note:

The RT-10 is not compatible with all high-definition display devices, which might produce video artifacts in the picture.

Video Out Video, S-Video, RGB

Controls video output format when the RT-10 is using the Euro or Peritel (TV A/V) connector. When Video is selected, the RT-10 passes composite video signals to the associated display device. When S-Video is selected, the RT-10 passes S-video signals to the associated display device. When RGB is selected, the RT-10 passes RGB and composite video signals to the associated display device. The composite video signals serve as sync.

. . . Video1 continues on page 3-28

3-27