Lexicon RT-10 Note:, Audio2, Default, Default, Possible, Possible, Parameter, Size Setting, Size Settings, Speaker Setting, Distance Setting, Distance Settings

Setup Menus

Lexicon

Audio2 (continued from page 3-17)

Speaker Setting Start

Opens the Speaker Setting screens, which can be used to set speaker sizes and distances when the RT-10 is using the 5.1-channel analog audio output connectors. Speaker size and distance settings have no effect when the RT-10 is using the 2-channel analog audio output connectors or digital audio output connector.

Note:

RT-10 speaker settings do not need to be configured when the RT-10 is connected to an associated component such as the MC-12 Digital Controller, which allows speaker settings to be configured for analog audio sources. The associated component must not be using analog audio connections in bypass.

	Parameter	Default		Possible	Default		Possible
		Size Setting		Size Settings	Distance Setting		Distance Settings
L/R		Large†	•	Large†	10.0ft `	•	1.0 to 30.0ft
C*		Large	•	Small `	10.0ft `	•	1.0 to 36.5ft
			•	Large `
			•	Off
LS*		Large	•	Small `	10.0ft `	•	1.0 to 36.5ft
			•	Large `
			•	Off
RS*		Large	•	Small `	10.0ft `	•	1.0 to 36.5ft
			•	Large `
			•	Off
SW*		On	•	On `	10.0ft `	•	1.0 to 36.5ft
			•	Off

`These settings are recommended when the RT-10 is connected to an MC-12 or MC-8 Digital Controller. When no setting is indicated, any setting can be selected.

*These Speaker Setting parameters are associated with the Setup Navigator Center Speaker (3-6), Surround Speakers (3-6), and Sub-woofer (3-7) prompts.

†The L/R size parameter setting cannot be adjusted. This parameter has a fixed Large setting to provide full-range audio output through the front left and right channels.

3-18