RT-10

Troubleshooting & Maintenance

RF interference is present in the audio output.

1.Make sure the RT-10 is not positioned near unshielded TV or FM antennas, cable TV decoders, and other RF emitting devices that might cause interference. Replace unshielded cables with shielded cables whenever possible.

Volume level seems to differ between DVDs and CDs.

1.DVDs and CDs are recorded with different processes, which might cause them to output audio at different volume levels.

The RT-10 will not pass Dolby Digital, DTS, or MPEG signals to the associated component.

1.Make sure the Dolby Digital, DTS, and MPEG parameter (3-12 to 3-14) settings are compatible with the associated component. For instance, the Dolby Digital parameter should be set to Dolby Digital if the associated component is compatible with Dolby Digital sources and to Dolby DigitalPCM if the associated component is not compatible with Dolby Digital sources.

2.Make sure all associated components are configured with the correct settings.

PLAYBACK ISSUESThe disc drawer automatically opens when a disc is loaded.

1.Make sure a compatible disc is loaded. The RT-10 is compatible with 5-inch (12cm) and 3-inch (8cm) conventional, round discs. Do not attempt to load discs with other size and shape characteristics, such as those shown below. All discs must align with the circular guide inside the disc drawer.

2.Make sure a compatible disc format is loaded (1-5).

3.If a DVD-V is loaded, make sure the RT-10 region code is compatible with the DVD-V region code. The map shown on page 1-4 indicates DVD-V region codes for all areas of the world. All DVD-Vs are marked with a region code, which is often located on the disc packaging. The RT-10 rear panel is also marked with a region code (2-8). The RT-10 is compatible with discs marked with this same region code or with the ALL region code. The RT-10 is not compatible with discs marked with other region codes.

4.Clean the loaded disc (5-16).

5.Condensation might have formed on the RT-10 lens (1-4). If this occurs, allow at least 1 hour for condensation to evaporate before attempting to load a disc.

. . . Playback Issues continues on page 5-8

5-7