RT-10

Playback Controls

CAMERA ANGLES

ANGLE

•Pressing the remote control ANGLE button opens the Angle bar shown below, which can be used to select the desired camera angle.

•Camera angle selection is available for DVD-V scenes recorded from multiple camera angles. Camera angle selection is not available for other disc formats or for DVD-V scenes recorded from one camera angle. In addition, camera angle selection is not available unless playback is activated.

•The Angle Indicator parameter (3-35) activates and deactivates the indicator. When set to On, the indicator appears on the front panel display when playback of a scene recorded from multiple camera angles is in progress. When set to Off,

the indicator does not appear on the front panel display when playback of a scene recorded from multiple camera angles is in progress.

To select a camera angle:

1.When playback is activated, press the ANGLE button to open the Angle bar shown below.

•The Angle bar indicates the number of the selected camera angle and the number of camera angles from which the currently playing scene was recorded For instance, the Angle bar shown below indicates that camera angle 1 of 2 is selected.

Angle :1/2

•If the Angle bar indicates that camera angle 1 of 1 is selected, the currently playing scene was recorded from one camera angle. In this case, camera angle selection is not available.

•If the Angle bar does not open at the top of the on-screen display, camera angle selection might not be available for the loaded disc.

2.When the Angle bar opens, press the ANGLE button again to cycle through all camera angles available for the currently playing scene. The remote control number buttons can also be used to enter the number of the desired camera angle (if known).

Note:

The Angle bar automatically closes a few seconds after the last command is received. If this occurs, playback will automatically activate from the selected camera angle.

3.When the desired camera angle is selected, press the Play button or the remote control ENTER button to activate playback from the selected camera angle.

4-9