Lexicon RT-10 Note:, Audio1, Dolby Digital Out, Audio DRC (Dynamic Range Control)

Setup Menus

Lexicon

Audio1 (continued from page 3-11)

Audio1	A2	Video1	V2	Language		General
		Audio DRC
					Off
Dolby Digital Out					On
		DTS Out		--- DTSPCM
	Linear PCM Out			--- Down Sample On
		MPEG Out		--- MPEGPCM
		Digital Out		--- On
	SACD Playback			--- 2ch Area
	Move					SETUP	Exit

Audio1	A2	Video1	V2	Language		General
		Audio DRC		--- Off
Dolby Digital Out					Dolby Digital
		DTS Out			Dolby DigitalPCM
	Linear PCM Out			--- Down Sample On
		MPEG Out		--- MPEGPCM
		Digital Out		--- On
	SACD Playback			--- 2ch Area
	Move					SETUP	Exit

Audio DRC (Dynamic Range Control) Off, On

Controls the dynamic range of Dolby Digital-encoded sources. When On is selected, the RT-10 reduces the dynamic range of high-level peaks. As a result, low-level sounds become more audible. When Off is selected, the RT-10 maintains the original dynamic range of low- and high-level sounds.

Note:

This parameter is only effective with Dolby Digital- encoded DVDs. Its effectiveness varies depending on the loaded disc, the speaker configuration, and associated component settings.

Dolby Digital Out Dolby Digital, Dolby DigitalPCM

Controls Dolby Digital audio output format when a Dolby Digital source is present and the RT-10 is using the digital audio output connector.

Select Dolby Digital if the associated component is compatible with Dolby Digital sources. The RT-10 will pass Dolby Digital signals directly to the associated component. Select Dolby DigitalPCM if the associated component is not compatible with Dolby Digital sources. The RT-10 will convert Dolby Digital signals to PCM before passing them to the associated component.

The Dolby Digital Out parameter is associated with the Setup Navigator Digital Jack prompt (3-7). The Dolby Digital Out parameter and Digital Jack prompt settings have no effect when the RT-10 is not using the digital audio output connector.

3-12