Playback Controls

Lexicon

A-B Repeat Playback (continued from page 4-21)

To deactivate A-B repeat playback:

•Press the A-B button or the remote control CLEAR button to activate playback at the current playback time. In some cases, the A-B button must be pressed twice in succession to deactivate A-B repeat playback. The Repeat Off bar shown on page 4-20 will open at the top of the on-screen display to indicate that A-B repeat playback has been deactivated.

•Press the Stop button to activate stop or resume mode. In some cases, the Stop button must be pressed twice in succession to activate stop mode. When stop mode is activated, playback cannot be reactivated at the current playback time.

PROGRAM MODE

PROGRAM

•The remote control PROGRAM button can be used to activate program mode, which creates a program list for the loaded disc. When a program list has been created, program mode also activates program playback. The table on page 4-12 indicates the program playback modes available for each disc format.

•A program list is a user-defined playback order of titles, chapters, groups, or tracks. The table on the next page indicates the program lists available for each disc format.

•When playback of a program chapter or program track list is activated, playback of a non-programmed chapter or track might activate while the RT-10 searches for the next programmed chapter or track.

To navigate Program tabs:

Button

Command

Number Buttons

Insert the corresponding value in the selected

 

field. Refer to page 2-15 for instructions to

 

enter values 10 and above.

Note the following:

•Program lists cannot contain values 100 and above or values that are not included on the loaded disc. For instance, a program title list cannot include a value of 5 if the loaded disc does not include title 5.

•When a new value is inserted, no previously inserted values are replaced or deleted. The new value is inserted in the selected field, moving all previously inserted values in and to the right of the selected field one field to the right. All previously inserted values to the left of the selected field are not affected.

•The program list must include at least one blank field before a new value can be inserted.

CLEAR

Deletes the value in the selected field, moving

 

all previously inserted values to the right of the

 

selected field one field to the left. For instance,

 

the value to the immediate right of the selected

 

field moves to the selected field. A blank field

 

is inserted at the end of the program list.

 

 

 & 

Scroll upward and downward through

 

Program tab items.

 

 

 & 

Scroll to the previous and the next field. The

 

cursor will not scroll to blank fields.

 

 

Pause

Inserts a pause in the selected field. Pauses

 

must be inserted between two values. In other

 

words, pauses cannot be inserted in the first

 

and last fields.

 

 

4-22