RT-10

Setup Menus

Exit Setup Navigator Save or Delete Changes, Start Again

Determines whether Setup Navigator prompt settings are saved, deleted, or reentered. Select Save Changes to save prompt settings and close the Setup Navigator. Select Delete Changes to delete prompt settings and close the Setup Navigator. Select Start Again to reenter prompt settings. The OSD Language prompt (3-4) will open on the on-screen display. The Exit Setup Navigator prompt is not associated with a Setup menu parameter.

SETUP MENU

The Setup menu can be used to configure audio, video, language, and other general RT-10 settings. Available in expert and basic display modes, the Setup menu can be configured for the desired level of control. The Setup Menu Mode parameter (3-42) can be used to select the mode in which the Setup menu is displayed.

Setup Menu Mode

Expert, Basic

Determines the mode in which the Setup menu is displayed. Select Expert to display the Setup menu in expert mode, which includes all available parameters. The Setup menu is shown in expert mode at the top of the next page. Select Basic to display the Setup menu in basic mode, which only includes parameters that are required to configure the most common RT-10 settings. When displayed in basic mode, the Setup menu also includes a tutorial to describe the highlighted menu item. The Setup menu is shown in basic mode at the bottom of the next page.

To open the Setup Menu:

Press the remote control SETUP button.

To navigate the Setup menu:

Button

Command

ENTER

Selects the highlighted parameter or setting.

 

 

 and 

Scroll left and right through Setup menu tabs.

 

When a parameter is highlighted, pressing the

 

 arrow selects that parameter.

 

 

 and 

Scroll upward and downward through Setup

 

menu tabs, parameters, and settings.

 

 

RETURN

When a Setup menu tab is highlighted,

 

pressing the RETURN button closes the Setup

 

menu without saving parameter settings that

 

have been selected since the Setup menu was

 

opened. When a parameter or setting is

 

selected, pressing the RETURN button closes

 

the selected parameter without saving

 

changes. When this occurs, the cursor moves

 

to the selected Setup menu tab.

 

 

SETUP

Closes the Setup menu. (The Setup menu

 

automatically closes a few seconds after the

 

last command is received.)

 

 

3-9