RT-10

Troubleshooting & Maintenance

Some MP3 tracks appear to be missing from the loaded disc.

1.The RT-10 recognizes a maximum of 250 folders per disc and 250 tracks per folder. It ignores all folders and tracks that exceed this number.

Playback does not begin from a bookmarked playback time on the loaded disc.

1.Playback might have automatically activated from the beginning of the disc when the disc was loaded. If this occurs, press the Stop button to activate stop mode. Then, press the remote control LAST MEMO button to activate playback from the bookmarked playback time.

2.Make sure a DVD-V, DVD-RW/R or Video CD that does not include PBC menus is loaded. Last memory playback is not available for other disc formats. The table on page 4-12 indicates the playback modes available for each disc format.

3.The bookmark might have been deleted. The oldest bookmark is automatically deleted when the sixth bookmark is created. Video CD bookmarks are automatically deleted when the disc drawer is opened or when the RT-10 is powered off. All bookmarks are automatically deleted when factory-default settings are restored.

SETUP MENU ISSUESThe Setup Navigator automatically activates when the Setup Menu is opened.

1.When factory-default settings are restored, the Setup Navigator prompt (3-4) automatically opens on the on-screen display whenever the remote control SETUP button is pressed while stop mode is activated. If this occurs, select the Auto Start Off setting.

The Setup menu does not include some parameters.

1.Make sure the Setup Menu Mode parameter (3-9 and 3-42) is set to Expert. When the Setup Menu Mode parameter is set to Basic, the Setup menu is displayed in basic mode, which only includes parameters that are required to configure the most common RT-10 settings.

2.The RT-10 is manufactured for sale in several different countries. Certain parameters are not available on some versions.

Setup menu parameters cannot be adjusted.

1.Certain parameters cannot be adjusted when some playback modes are activated. In addition, certain parameters can be adjusted when playback is activated, although the setting does not take effect until stop mode is activated.

2.Certain parameters cannot be adjusted when some disc for- mats are loaded (3-11).

. . . Setup Menu Issues continues on page 5-10

5-9