RT-10

Setup Menus

Audio1 A2 Video1 V2 Language General

1Setup Navigator

2

TV Connection

TV Type Widescreen (16:9)

5

Standard

! Widescreen TV

 

 

 

 

16:9 aspect ratio

 

 

 

 

 

 

 

 

 

Move

ENTER

Select

SETUP

Exit

TV Type

Widescreen (16:9), Standard (4:3)

Controls the appearance of the picture on the associated display device screen, formatting the aspect ratio of the video output format to match the aspect ratio of the display device. Aspect ratios, which refer to width relative to height, differ among video output formats and display devices. A 16:9 aspect ratio is almost twice as wide as high and a 4:3 aspect ratio is almost square.

Select Widescreen (16:9) if the associated display device screen has a 16:9 aspect ratio. Select Standard (4:3) if the associated display device screen has a 4:3 aspect ratio. The appearance of the picture depends on the TV Type prompt setting, the video output format, the loaded disc, and display device settings.

The TV Type prompt is associated with the Video1 tab TV Screen parameter (3-25). The TV Type prompt Widescreen (16:9) setting is equivalent to the TV Screen parameter 16:9 (Wide) setting, and the TV Type prompt Standard (4:3) setting is equivalent to the TV Screen parameter 4:3 (Letter Box) setting. The TV Screen parameter also offers settings for 16:9 (Compressed) and 4:3 (Pan&Scan) viewing. Refer to the table on pages 3-25 and 3-26 for more information.

Audio1 A2 Video1 V2 Language General

1Setup Navigator

 

 

 

 

 

2

 

 

 

 

 

Amp Connection

 

2 Channel

 

Analog Jacks

5.1 Channel

5

 

Not Connected

! 2 channel jacks for L/R

7

 

 

 

 

 

 

Move

ENTER

Select

SETUP

Exit

Note:

•Some discs do not allow video output format adjustments.

•Neither the TV Type prompt nor the TV Screen parameter can be adjusted when the RT-10 is in playback mode.

Analog Jacks

2 Channel, 5.1 Channel, Not Connected

Controls analog audio output format when the RT-10 is using the analog audio output connectors. Select Not Connected if the RT-10 is not using the analog audio output connectors.

When 2 Channel is selected, the RT-10 passes analog audio sources to the Front L/R analog audio output connectors. When 5.1 Channel is selected, the RT-10 passes analog audio sources to the Front L/R, Surround L/R, Center, and Sub analog audio output connectors. Refer to the table on page 3-17 for more information.

. . . Setup Navigator continues on page 3-6

3-5