Playback Controls

Lexicon

Repeat Playback (continued from page 4-19)

Repeat

 

Repeat

 

Repeat

Title

 

Folder

 

Dic

 

 

 

 

 

 

 

 

 

Repeat

 

Repeat

 

Program

Chapter

 

Track

 

Repeat

 

 

 

 

 

 

 

 

 

Repeat

 

Repeat

 

Repeat

Group

 

All

 

Off

 

 

 

 

 

2.When playback is activated, press the REPEAT button to open one of the Repeat bars shown above will open at the top of the on-screen display.

•The Repeat bar indicates the selected repeat playback mode.

•If the Repeat bar does not open at the top of the on-screen display, repeat playback might not be available for the loaded disc. The table on page 4-12 indicates the repeat playback modes available for each disc format.

3.When the Repeat bar opens, press the REPEAT button again to cycle through all repeat playback modes available for the loaded disc.

•If program playback was activated when the REPEAT button was pressed, repeat program playback is available. Other repeat playback modes are not available.

Note:

The Repeat bar automatically closes a few seconds after the last command is received. When this occurs, the selected repeat playback mode is automatically activated.

4.When the desired repeat playback mode is selected, press the Play button or the remote control ENTER button to activate the selected repeat playback mode.

•Select Repeat Off to deactivate repeat playback. (This option is only available if program playback was activated when the REPEAT button was pressed.)

To deactivate repeat playback:

•Press the remote control CLEAR button to activate playback from the current playback time. The Repeat Off bar shown above (right) will open at the top of the on-screen display to indicate that repeat playback has been deactivated.

•Press the Stop button to activate stop or resume mode. In some cases, the Stop button must be pressed twice in succession to activate stop mode. When stop mode is activated, playback cannot be reactivated at the current playback time.

4-20