Lexicon RT-10 Note:, Prompt, TV Type, Sub-woofer, OSD Language, Analog Jacks, Digital Jack, Center Speaker, Setup Navigator, Setup Navigator, 96kHz PCM Audio

RT-10

Setup Menus

Setup Navigator Prompts

The table shown at the right lists all Setup Navigator prompts, along with their possible settings and associated Setup menu parameters.

Note:

Setup Navigator prompts should be configured while the disc drawer is empty.

`This setting is recommended when the RT-10 is connected to an MC-12 or MC-8 Digital Controller. When no setting is indicated, any setting can be selected.

. . . Setup Navigator continues on page 3-4

Setup Navigator	Available Settings		Associated Setup
Prompt			Menu Parameter(s)
Setup Navigator	• Start	• Auto Start Off	Setup Navigator
			(General tab, 3-42)
OSD Language	• English	• Italiano	OSD Language
	• français	• Español	(Language tab, 3-36)
	• Deutsch
TV Type	• Widescreen (16:9)	• Standard (4:3)	TV Screen
			(Video1 tab, 3-25)
Analog Jacks	• 2 Channel	• Not Connected	Audio Out
	• 5.1 Channel `		(Audio2 tab, 3-16)
Center Speaker	• Present `	• Not Present	Speaker Setting
			(Audio2 tab, 3-18)
Surround Speakers	• Present `	• Not Present	Speaker Setting
			(Audio2 tab, 3-18)
Sub-woofer	• Present `	• Not Present	Speaker Setting
			(Audio2 tab, 3-18)
Digital Jack	• Dolby Digital	• Dolby D/DTS/	Dolby Digital Out (3-12)
	• Dolby Digital/	MPEG	DTS Out (3-13)
	DTS `	• PCM	MPEG Out (3-14)
	• Dolby Digital/	• Not Connected	(Audio1 tab)
	MPEG
96kHz PCM Audio	• No	• Don’t Know	Linear PCM Out
	• Yes `		(Audio1 tab, 3-13)
Exit Setup Navigator	• Save Changes	• Start Again	None
	• Delete Changes

3-3