Appendix

Lexicon

SPECIFICATIONS

Note the following:

•The RT-10 is manufactured for sale in several different countries. Each version features a rear panel that includes connectors appropriate to that particular region. These specifications include all possible connectors. However, certain connectors are not included on some versions. These instances are noted in the rear panel connector descriptions that begin on page 2-8.

•DVD-A and SACD test discs were used to determine audio specifications. Typical production unit specifications might differ.

•Specifications are subject to change without notice.

Audio Output Connectors

Analog

•

4 stereo (RCA) pairs for Front L/R (2 pairs), Surround

 

 

L/R, Center, and Subwoofer

 

 

 

Digital

•

1 AES/EBU (XLR), 1 coaxial (RCA), and 1 optical

 

 

(Toslink)

 

•

Sample Rates: 44.1, 48, 88.2, and 96kHz (16 to 24

 

 

bits)

 

• All digital audio output connectors conform to IEC-958

 

 

and S/PDIF standards.

 

 

 

Audio Performance

D/A Conversion

•

24-bit/192kHz PCM and pure DSD

 

 

 

Frequency Response

•

20Hz to 20kHz (±0.5dB), -1.0dB at 50kHz, reference

 

 

1kHz (Front L/R)

 

 

 

THD + Noise

•

0.004% at 1kHz

 

 

 

Dynamic Range

•

100dB

 

 

 

Signal-to-Noise Ratio

•

100dB

 

 

 

Channel Separation

•

100dB

 

 

 

Output Level

•

2.0V maximum

 

 

 

Video Output Connectors

Composite

•

2

(RCA)

 

 

 

 

S-Video

•

1

 

 

 

 

 

Component

•

2

(1 RCA and 1 BNC) and 14-pin D connector

 

 

 

 

Specifications are subject to change without notice.

A-2