Lexicon RT-10 Note:, Audio1, MPEG Out, Digital Out, Linear PCM Out (continued)

Setup Menus

Lexicon

Audio1 (continued from page 3-13)

Audio1	A2	Video1	V2	Language		General
		Audio DRC		--- Off
Dolby Digital Out				--- Dolby Digital
		DTS Out		--- DTSPCM
	Linear PCM Out			--- Down Sample On
		MPEG Out			MPEG
		Digital Out			MPEGPCM
	SACD Playback			--- 2ch Area
	Move					SETUP	Exit

Audio1	A2	Video1	V2	Language		General
		Audio DRC		--- Off
Dolby Digital Out				--- Dolby Digital
		DTS Out		--- DTSPCM
	Linear PCM Out			--- Down Sample On
		MPEG Out		--- MPEGPCM
		Digital Out			On
	SACD Playback				Off
	Move					SETUP	Exit

Linear PCM Out (continued)

The Linear PCM Out parameter is associated with the Setup Navigator 96kHz PCM Audio prompt (3-8). The Linear PCM Out parameter and 96kHz PCM Audio prompt settings have no effect when the RT-10 is not using the digital audio output connector.

Note:

The RT-10 always downsamples 192 and 176kHz signals to 96 and 88.2kHz before passing them to the associated component, regardless of the Linear PCM Out parameter and Setup Navigator 96kHz PCM Audio prompt settings.

MPEG Out MPEG, MPEGPCM

Controls MPEG audio output format when an MPEG source is present and the RT-10 is using the digital audio output connector.

Select MPEG if the associated component is compatible with MPEG sources. The RT-10 will pass MPEG signals directly to the associated component. Select MPEGPCM if the associated component is not compatible with MPEG sources. The RT-10 will convert MPEG signals to PCM before passing them to the associated component.

The MPEG Out parameter is associated with the Setup Navigator Digital Jack prompt (3-7). The MPEG Out parameter and Digital Jack prompt settings have no effect when the RT-10 is not using the digital audio output connector.

Digital Out On, Off

Activates and deactivates the RT-10 digital audio output connector. Select On to activate the digital audio output connector. Select Off to deactivate the digital audio output connector.

3-14