PCI Configuration
– Embedded SCSI submenu
Option | Parameter | Description | Your Setting |
SCSI Controller | [Enabled] | Enables or disables the onboard SCSI |
|
| Disabled | controllers. |
|
Option ROM Scan | [Enabled] | If Enabled, initialize device expansion ROM. |
|
| Disabled |
|
|
|
| [ | ]: |
– Embedded NIC (Dual Gbit) submenu
Option | Parameter | Description | Your Setting |
LAN Controller | Disabled | If Disabled, the BIOS will hold the |
|
| [Enabled] | embedded chip in reset. In this |
|
|
| configuration, the controller hardware is |
|
|
| completely disabled, and will be invisible to |
|
|
| the PnP operating systems. |
|
Option ROM Scan | [Enabled] | If Enabled, initialize device expansion ROM. |
|
| Disabled |
|
|
|
| [ | ]: |
– Embedded Video Controller submenu
Option | Parameter | Description | Your Setting |
Onboard VGA | Disabled | If Disabled, the BIOS will hold the |
|
Control | [Enabled] | embedded chip in reset. In this |
|
|
| configuration, the controller hardware is |
|
|
| completely disabled, and will be invisible to |
|
|
| the PnP operating systems. |
|
|
| [ | ]: |
Option | Parameter | Description | Your Setting |
PCI Slot 1B/2B/3B | Disabled | Used to enable or disable an option ROM |
|
Option ROM | [Enabled] | on a PCI board connected to the |
|
|
| riser card. |
|
PCI Slot 1C/2C/3C | Disabled | Used to enable or disable an option ROM |
|
Option ROM | [Enabled] | on a PCI board connected to the |
|
|
| riser card. |
|
Option | [Disabled] | Used to enable or disable an option N8112- |
|
Riser Support | Enabled | 02 riser card |
|
PCIe Option Mode | [Disabled] | Cannot be used in this system. Do not |
|
| Enabled | change the factory setting. |
|
|
| [ | ]: |