Installing the Operating System with Express Setup
10.Select the Windows family.
Select "Microsoft Windows Server 2003 Standard Edition Microsoft Windows Server 2003 Enterprise Edition" category.
NOTE: If you select "Skip" at step 8, this menu does not appear.
Go on the step 13.
11.Next, [Basic Information] wizard appears. Confirm the parameters, modify if necessary, and then click [Next].
After that, click [Next], [Back], or [Help] on the screen to continue. Modify the parameters each time if necessary.
IMPORTANT:
Reserve the partition to install the OS more than the minimally required size.
If you select "Use Existing Array" at "New/Existing RAID Configuration", the information included in the first partition (excluding maintenance partition) will all be formatted and deleted. The information included in the other partition will be retained.
In the figure below, describes the partition which information will be deleted when maintenance partition exists.
First Partition | Second | Third | Fourth |
<Maintenance Partition> | Partition | Partition | Partition |
Retained | Deleted | Retained | Retained |
You can not
If you specify other than 4095MB for the "Installing Partition", it is necessary to convert to NTFS.
If "Use Existing Array" at "New/Existing RAID Configuration" is
selected but the partition other than the one to install Windows Server 2003 does not exist (excluding maintenance partition), Express Setup will reserve the maximum area of the hard disk drive to install Windows Server 2003.
You can not go to the next screen if the specification is incorrect.
NOTES:
If you click [Cancel] in [Basic Information] screen, the screen will go back to select the OS. [Cancel] exists only in [Basic Information] screen.
If you click [OK] in [Role of Computer] screen, the setup automatically selects default value for the later specification to continue the installation.