General Description 2-41

After taking out the CD-ROM, return the tray into the drive.

When you fail to eject the CD-ROM tray with the Eject button and take out the CD-ROM from the server, follow the procedure below.

Emergency hole

1.Press the POWER switch to power off the server. (The POWER LED goes off.)

2.Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length (a straightened large paper clip will make a substitute) into the emergency hole on the right front of the CD-ROM drive and gently push it in until the tray is ejected.

IMPORTANT:

„Do not use a toothpick or plastic stick that is easy to break.

„If the above procedure does not let you take out the CD-ROM, contact your service representative.

3.Hold the tray and pull it out.

4.Take out the CD-ROM.

5.Push the tray back into position.