LAN Connector LEDs
There are two LEDs for each of the two LAN ports (connectors) on the rear panel.
Speed LEDs
LINK/ACT LEDs
LINK/ACT LED
Each LINK/ACT LED indicates the status of the standard network port of the server. While power is supplied to the server and HUB and the connection is correct, the LED is on (green). The LED turns green and flashes while the network port is transmitting/receiving data.
If the LED does not go on when the LINK state is placed, check if the network cable is in normal state and if it is connected correctly. If the LED does not go on yet when the network cable is normal, the network (LAN) controller may be faulty. In this case, contact your service representative.
Speed LED
This LED indicates whether each of the network ports normally equipped with the server is operated through the