NEC manual 111

Configuring Your Server 4-15

Server

Option	Parameter	Description	Your Setting
System	–	System Management submenu is
Management		displayed.
Console	–	Console Redirection submenu is
Redirection		displayed.
Event Log	–	Event Log Configuration submenu is
Configuration		displayed.
Assert NMI on	Disabled	Specify whether to support PCI PERR or
PERR	[Enabled]	not.
Assert NMI on	Disabled	Specify whether to support PCI SERR or
SERR	[Enabled]	not.
FRB-2 Policy	Disable FRB2	Set the FRB level 2 timer.
	Timer
	[Retry 3 Times]
Boot Monitoring	[Disabled]	Specify whether to enable or disable the
	5 Minutes	boot monitoring function on booting, or
	10 Minutes	select the time limit for timeout.
	15 Minutes	To use this function, install NEC
	20 Minutes	ESMPRO Agent. Set this item to
		"Disabled" if the system is booted from
	25 Minutes
		OS without installation of NEC
	30 Minutes
		ESMPRO Agent.
	35 Minutes
	40 Minutes
	45 Minutes
	50 Minutes
	55 Minutes
	60 Minutes
Boot Monitoring	[Retry 3 Times]	Specify the processing at the
Policy	Retry Service	occurrence of timeout during boot
	Boot	monitoring.
	Always Reset	If [Retry 3 times] is selected, the system
		is reset after the occurrence of timeout
		and OS boot is retried up to three times.
		If [Retry Service Boot] is selected, the
		system is reset after the occurrence of
		timeout and OS boot is retried up to
		three times. Then the boot is tried from
		the service partition for three times. The
		failure in the third boot causes the
		system to stop booting.
		If [Always Reset] is selected, the system
		is reset after the occurrence of timeout
		and OS boot is retried repeatedly.
		* If no service partition exists in the
		system, OS boot is retried repeatedly
		from the system partition.
Thermal Sensor	Disabled	Specify whether to enable or disable the
	[Enabled]	thermal sensor monitoring function. If a
		thermal error is detected with this item
		being set to "Enabled", the system stops
		at the end of POST.