NEC manual 119

Configuring Your Server 4-23

„Advanced Configuration

Move the cursor onto "Advanced Configuration" and press Enter to display the submenu. The following table lists submenu items, available parameter, and descriptions.

Submenu item	Parameter	Description
Reset SCSI Bus at	[Enabled]	Select "Enabled".
IC Initialization	Disabled
Display <Ctrl><A>	[Enabled]	Select "Enabled".
Message During	Disabled
BIOS Initialization
Extended Int 13	[Enabled]	Select "Enabled".
Translation for DOS	Disabled
Drives > 1 GByte
POST Display Mode	[Verbose]	Select "Verbose".
	Silent
	Diagnostic
SCSI Controller Int	[Enabled]	Enable or disable SCSI BIOS.
13 Support	Disabled:	Select "Enabled" for most cases other than the
	NOT Scan	following:
	Disabled:	•	To boot the OS from a hard disk drive
	scan bus		connected to any other controller than SCSI
			controller. (If the controller has no hard disk
			drives connected, there is no problem.)
		•	BIOS of the SCSI controller may be disabled to
			reserve an area in the expansion ROM space
			if the controller has no hard disk drives
			connected.
Domain Validation	[Enabled]	Select "Enabled".
	Disabled
Support Removable	Boot Only	AIC-79xx BIOS automatically controls the
Disks Under Int 13	All Disks	removable disks.
as Fixed Disks	[Disabled]
BIOS Support for	[Enabled]	Select "Enabled".
Bootable CD-ROM	Disabled
			[	]: Factory-set

„HostRAID

Move the cursor onto "HostRAID" and press Enter to choose the HostRAID option.

Submenu item	Parameter	Description
HostRAID	Enabled	Select "Disabled" if the onboard HostRAID
	[Disabled]	controller is not used.
		[	]: Factory-set

NOTE: For detail explanation on the HostRAID feature, see

SCSISelect Utility User's Manual and Adaptec Storage Manager -

Browser Edition User's Guide or Adaptec Storage Manager User's

Guide. You may view or print these documents from the NEC

EXPRESSBUILDER CD-ROM.