2-16 General Description

STANDARD FEATURES

High performance

„IntelXeonProcessor (3.20DGHz / 3.20GHz / 3.40GHz / 3.60GHz / 3.80GHz)

„High-speed network interface (1000Mbps/100Mbps/10Mbps supported)

„High-speed disk access (Ultra320 SCSI)

„High-speed memory access (DDR2-400)

Expandability

„Three full-length, full-height 64-bit/100 MHz PCI-X riser slots and three low profile 64-bit/66 MHz riser slots

„Large memory of up to 16 GB

„Six hot-swap SCSI hard disk drive bays

„Up to two multi-processors are available for upgrade.

„One backup file bay

„USB2.0 interface (A USB-support driver is required.)

„Two network ports

High-reliability

„Memory monitoring feature (error correction/error detection)

„CPU/memory degradation feature (logical isolation of a failed device)

„Memory chipkill feature

„Bus parity error detection

„Temperature detection

„Error notification

„Internal fan monitoring feature

„Internal voltage monitoring feature

„Redundant power supply (hot-swap)

„Onboard RAID 0/1

„Auto-rebuild feature (hot-swappable)

„BIOS password feature

„Mechanical security lock

„Remote Management Card

„Redundant fans (option)

Management Utilities

„NEC ESMPRO

„NEC DianaScope

Maintenance Features

„Off-line Maintenance Utility

„Memory dump feature using the DUMP switch

Many Available Features

„Graphic accelerator "ATI RADEON 7000" support

„El Torito Bootable CD-ROM (no emulation mode) format support

„POWER switch mask

„Software power-off

„Remote power-on feature

„AC-Link feature

„Consoleless feature

Self-diagnosis

„Power On Self-Test (POST)

„Test and Diagnosis (T&D)

Easy and Fine Setup

„NEC EXPRESSBUILDER (system setup utility)

„Configuration Parameter Diskette Creator

„SETUP (BIOS setup utility)

„SCSISelect (SCSI device utility)