Upgrading Your Server 9-17

Drive Cover

Open the drive cover when installing/removing a fan assembly, processor, and backup file device or reconnecting an internal cable.

Removal

1.See the section "Preparing for Installation and Removal" described earlier to prepare.

2.Pull out the server from the rack.

3.Slide the drive cover toward the rear of the server while pressing the lock button on the cover.

4.Lift off the drive cover from the server.

Installation

When installing the drive cover, confirm that the tab of the cover is securely inserted into the slot in the server frame.

Slide the drive cover toward the rear of the server. The drive cover is locked when a distinct "click" is heard. At this time, check the release button for normal state.