5-56 Installing the Operating System with Express Setup

HostRAID Setup Flow

The flowchart below shows the HostRAID system setup procedure.

Start

Is HostRAID used as

boot disk?

Yes

Enable the HostRAID

feature and create RAID by

using SCSISelect Utility

Refer to SCSISelect Utility User's Manual.*1

Install driver (install OS).

See Appendix D or E of

this guide.

Update system.

See this chapter.

Install ASMBE or ASM.

See ASMBE/ASM User's

Guide*2.

Install Standby/Hibernation

Lock driver.

See appendix of

ASMBE/ASM User's

Guide*2.

End

*1 You can create RAID by using the NEC EXPRESSBUILDER. In this case, only you need to do is to set the HostRAID feature to "Enabled" by using SCSISelect Utility.

*2 For Windows Server 2003 x64 Edition: Adaptec Storage ManagerUser's Guide

For Windows Server 2003 and Windows 2000: Adaptec Storage Manager- Browser Edition User's Guide

You may view or print these documents from the NEC EXPRESSBUILDER CD-ROM.

Migration of Hard Disk Drive (Migration)

When you want the system SCSI hard disk drive using SCSI controller on the I/O board migrate to RAID1 of SCSI HosRAID, the "Migration" must be executed.

For details, please refer to "Express5800 SCSI HostRAID Migration procedure (Windows)" of online documents.