3-14 Setting Up Your Server

Removing the Server from the Rack Assembly

The server should be removed from the rack by at least two persons.

WARNING

Observe the following instructions to use the server safely. Failure to follow these instructions may result in death or serious personal injury. See pages 1-3 to 1-8 for details.

„Do not lift the server only by a single person.

„Do not pinch your finger with mechanical components.

„Note high temperature.

„Do not pull out a device from the rack if the rack is unstable.

„Do not leave more than one device being pulled out from the rack.

1.Release the security lock to remove the front bezel.

Security lock

2.Confirm that the power of the server is OFF, and disconnect the power cable and all the interface cables connected to the server.

3.<This step is required only when the optional cable arm is mounted.>

Remove the two screws securing the cable arm, and dismount the cable arm from the server.

4.Loosen the two captive thumb screws.