Upgrading Your Server 9-49

Backup Device

The server has one slot for installing a backup device such as a magnetic tape drive.

IMPORTANT:

„A SCSI cable K410-130(00) is necessary for installing a SCSI backup device.

„Set "OFF" for the terminating resistor of the backup device you are going to install, and set a SCSI ID different from those of other devices. For the settings, see the manual provided with the server.

„Install only a backup device specified by NEC.

„The size of a backup device which can be installed in this server is as follows:

Width: Up to about 9 cm (3.5 inches)

Height: Up to about 4 cm (1.6 inches)

Backup device