2.At least two persons are required to install the server. Securely hold the server and install it in the rack.
Firmly fit the inner rails on the sides of the server into the rail assemblies that are installed on the rack, and then slowly push the server into the rack.
If the server is locked on its way into the rack, slowly push it in while pressing the release levers on the right and left sides of the server.
When the server is installed for the first time, the mechanical parts are rather hard to slide. You may feel strong friction when pushing in the server. In this case, strongly push it in.
Release lever
3.Confirm that the sliding rails work normally by pulling the server out of the rack and pushing it in several times.
NOTE: Confirm that the sliding rails work normally. If the sliding rails are stuck to the rack frame and do not come out, reinstall them.