5-48 Installing the Operating System with Express Setup

Setting for Solving Problems

Setup the following issue in advance so that your computer can recover from any trouble precisely and as soon as possible when it should occur.

Memory Dump (Debug Information)

This section describes the procedures for collecting memory dump (debug information) in the server.

IMPORTANT: Cautions for the Memory Dump

„The staff of maintenance service representative is in charge of collecting memory dump. Customers need only to specify the memory dump.

„If any trouble occur after specifying the process below, the message to inform that the system is in short of virtual memory may appear, but continue to start the system. If you restart the system in such case, memory dump may not be stored correctly.

Follow the procedure below to specify.

1.Point to [Settings] in Start menu and click [Control Panel]. The [Control Panel] dialog box appears.

2.Double-click [System].

The [System Properties] dialog box appears.

3.Click [Advanced].

4.Click [Startup and Recovery].

5.Enter the location to write the debug information to the text box.

e.g. Write the debug information in D drive with the file name "MEMORY.DMP". D:\MEMORY.DMP