Nikon LS4000 109, You want to scan into the MA-20 S, This manual, Using the Film Holder

8	Insert the aperture containing the frame
	you want to scan into the MA-20 (S).

9	Scan the frame as described on pages
	86–98 of this manual.

Insert the aperture containing the frame you want to scan into the MA-20 (S).

10 After scanning, wait for the status LED to stop blinking and then remove the FH-3 from the film slot by hand. Do not use the eject button on the MA-20 (S). You can now turn the scanner off as described on page 100 of this manual.

Using the Film Holder

Do not use force when inserting the holder, as this could damage the holder or the scanner.

To avoid damage to the film, remove dust and lint from the film holder before use. Dust and lint can affect the quality of scanned images and damage your film.

Do not use the eject button on the MA-20 (S) when removing the FH-3. Remove the FH-3 by hand.

109