Nikon LS4000 user manual 146

COOLSCAN IV ED (LS-40 ED)
Film	• 35 mm film:	Positive and negative film, both color and
		monochrome, may be used. Film may be
		scanned in strips of up to six frames or
		mounted as 35 mm slides using mounts of
		from 1.0 to 3.2 mm in thickness and 49.0–
		50.8 mm in width.
	• APS (IX240) film: APS film cartridges can be scanned with the
		optional IA-20 (S) adapter for APS (IX240) film.
	• Prepared slides:	Prepared slides can be scanned using the op-
		tional FH-G1 slide holder for the MA-20 (S).

Aperture	25.1 ×	36.8 mm when scanning 35 mm film in the MA-20 (S) or
	FH-3 (S)
	25.1 ×	38.0 mm when scanning 35 mm film in the SA-21
	18.6 ×	28.4 mm when scanning APS (IX240) film
Scan range	2870 ×	4203 pixels when scanning 35 mm film in the MA-20 (S)
	or FH-3 (S)
	2870 ×	4332 pixels when scanning 35 mm film in the SA-21
	2120 ×	3237 pixels when scanning APS (IX240) film
Effective aperture	23.3 ×	36.0 mm when scanning 35 mm film in the SA-21
	24.0 ×	36.0 mm when scanning 35 mm film in the FH-3 (S)
	25.1 ×	36.8 mm when scanning 35 mm film in the MA-20 (S)
	16.1 ×	26.9 mm when scanning APS (IX240) film
Effective scan range	2657 ×	4104 pixels when scanning 35 mm film in the SA-21
	2736 ×	4104 pixels when scanning 35 mm film in the FH-3 (S)
	2870 ×	4203 pixels when scanning 35 mm film in the MA-20 (S)
	1836 ×	3067 pixels when scanning APS (IX240) film
Scanning system	Fixed-film, movable-plane single-pass optical scanning system
Light source	Red, green, and blue (RGB) LEDs
Sensor	2870-pixel, linear CCD image sensor
Color separation	Performed by RGB color LEDs
Optical resolution	Maximum 2900 pixels per inch
Analog-to-digital (A/D)
conversion	12 bits per color (RGB)
Output	Full color (8 or 16 bits per color [RGB])
Focus	Autofocus, Manual

146