Nikon LS4000 user manual Maintenance, Caring for Your Scanner, Storing the Scanner

Maintenance

Caring for Your Scanner

Storing the Scanner

When not using the scanner, turn it off, remove any adapters from the adapter slot, and slide the cover closed as shown below.

Sliding cover

If you will not be using the scanner for an extended period, turn off and unplug the scanner. Store the scanner where:

•the temperature is between minus twenty and plus sixty degrees Centigrade (–4°F – +140°F)

•the humidity is between twenty and ninety percent (no condensation)

Servicing Your Scanner

Your scanner is a precision machine. We recommend that you take your scanner and adapters to an authorized Nikon service representative once every one to two years for inspection, and once every three to five years for servicing (a fee is charged for these services). Frequent inspection and servicing are particu- larly recommended in the case of scanners used in commercial applications.

When not using the scanner, remove any adapters and close the cover to prevent dust from accumulating inside the scanner. Accumulation of dust on the optical mirrors in the vicinity of the adapter slot could result in scanning errors. Should an error occur, remove dust by sending air into the adapter slot with a blower. Do not insert your fingers into the adapter slot.

137