Windows 98 Second Edition SE, Turn the computer on | Nikon LS4000

Windows 98 Second Edition (SE)

4000 ED

Registering the Scanner with Windows 98 SE

Before beginning device registration, make sure that you have completed the IEEE 1394 up- date described in “Updating the IEEE 1394 Drivers (Windows 98 SE only)” ( 17).

1	Turn the computer on
1	Make sure that the computer is on, and that the scanner is off and connected to the
	computer via the IEEE 1394 cable.
2	Turn the scanner on
2	Turn the scanner on and wait for Windows to display a message.

If the Insert Disk Dialog is displayed If a message appears prompting you to insert the Windows 98 Second Edition CD, click OK and proceed to step 3a. Do NOT insert the Windows 98 Second Edition CD.

If the Add New Hardware Wizard is displayed

If the dialog shown at right is displayed,

click Next and proceed to step 3b.

If no message is displayed

If no message is displayed after 60 sec- onds, proceed to “Updating the Device Driver (Windows 98 SE) ( 55).”

3a Locate “ntmap.sys”

The dialog shown at right will be displayed. Click Browse.

50

Image 60

Nikon LS4000 user manual Windows 98 Second Edition SE, Registering the Scanner with Windows 98 SE, Turn the computer on

Contents

Windows Only Scanning Guide Basic scanning See Scan window 120 Product Documentation User’s Manual this manual For Your Safety Do not disassemble or modify Use an appropriate power supply IiiPage Trademark Information Table of Contents Vii Scanning 35-mm SlidesScanning 35-mm Film Nikon Scan Introduction ViiiIllustrations Life-Long Learning Setup En Before Using Your Scanner Connecting the ScannerUsing the Scanner with a Windows Computer Status LED Adapter slot Accessories SUPERCOOLSCAN4000ED Coolscanived En Keep the Adapter Slot Closed Choose a Location Protect Your Film En Using the 4000 ED with Other Devices Using the Coolscan IV ED with Other DevicesConnecting the Scanner Do I Need to Install the Ieee 1394/Firewire Interface Board? Installing the Interface Board En Installing the Interface Board 4000 ED Only Windows XP Home Edition/Windows XP Professional Device Manager button Check that NEC Firewarden Ohci Dialog shown at right will be dis Played. Click Yes to restart your comDevice Manager tab. Check that Select Search for the best driver for NextPlayed. After making sure that none Options are selected, click NextPage En Installing Nikon Scan Installing Nikon Scan under WindowsNikon Scan 3 Version Updating the Ieee 1394 Drivers Windows 98 SE Only En Installation Displayed, click Nikon ScanIf the Welcome Dialog Is Not Displayed Windows XP/Windows 2000 Professional Workflow. More information about Reference ManualAt right. Click Windows InstallShield wizard Installation of Nikon ScanDisplayed. Click Finish to exit Installation Mac OSMemory Requirements under Mac OS Install Location menu and click Stall Software Manual Click OK. More information about This completes installation of Nikon Scan Connecting the Scanner Connecting the Power Cable En Connecting the Interface Cable 4000 ED Four-Pin Connectors Connecting the Interface Cable Coolscan IV ED En Turn the Scanner On For more information on Registering the 4000 ED with Windows 4000 ED Registering the 4000 ED with Windows Windows XP Home Edition/Windows XP ProfessionalRegistering the Scanner with Windows XP If the List of Drivers Is Not Displayed Select ls4000xp.inf Select ls4000xp.inf in the list of drivers and click NextLs4000xp.inf Confirming Device Registration Windows XP If the Scanner Is Not Listed Confirm that the scanner is working properly Double-click the listing for your scanner that Click Reinstall Driver… Updating the Device Driver Windows XPDriver… Welcome Window Select ls4000xp.inf Windows 2000 Professional Registering the Scanner with Windows 2000 ProfessionalWelcome Window Select Specify a location Click Browse…Select Specify a location and click Next Confirm the file path If the Correct Path Is Not Displayed Click Finish Click Finish to complete installation Confirming Device Registration Windows 2000 Professional IconConfirm that the scanner is listed under Imaging devices If Imaging devices appears in the De Double-click the listing for your scanner Click Update Driver… Open the Driver tab and click UpdateUpdating the Device Driver Windows 2000 Professional Scanner Properties dialog 4000 ED Windows Millennium Edition Me Registering the Scanner with Windows MeInserting the Nikon Scan CD Select LS4000ME.INF 4000 ED Confirming Device Registration Windows Me Played. Open the Device Manager tabConfirm that the scanner is listed under Imaging Device If Imaging Device appears in the Device Confirm that the scanner is working properly Updating the Device Driver Windows Me Select the search option Select LS4000ME.INF in the list of drivers and click OKClick Finish Windows 98 Second Edition SE Registering the Scanner with Windows 98 SETurn the computer on Computer via the Ieee 1394 cable 3b Insert the Nikon Scan 3 CD Select Specify a location and clickBrowse Select the Win98SE folder Confirming Device Registration Windows 98 SE Confirm that the scanner is working properly Open the Driver tab and click Reinstall Updating the Device Driver Windows 98 SEErties dialog Select the search option and click Next Dialog will be displayed stating that Win Registering the Coolscan IV ED with Windows If the Dialog Is Not Displayed IV ED Played. Open the Hardware tab and click Device Manager Confirm that the scanner is working properly Updating the Device Driver Windows XP Select ls40xp.inf Select ls40xp.inf in the list of drivers and click NextLs40xp.inf Click Continue Anyway IV Coolscan Select CD-ROM drives Click Finish Click Finish to complete installation Confirming Device Registration Windows 2000 Professional Confirm that the scanner is working properly Updating the Device Driver Windows 2000 Professional Welcome Window Insert the Nikon Scan CD into the CD-ROM drive IV ED Confirming Device Registration Windows Me Confirm that the scanner is working properly Updating the Device Driver Windows Me Select the search option Windows 98 Second Edition SE Select the Ls40 folder Begin installation of the device drivers Confirming Device Registration Windows 98 SE Confirm that the scanner is working properly Click Reinstall driver Open the Driver tab and click Reinstall driver Scan 3 CD into the CD-ROM drive, then select Specify a location and click BrowseWelcome window Select the Ls40 folder Scanning 35-mm Slides Ready the Slide Insert the Adapter Insert the Slide Compatible Slides Scan the Slide Making a ScanWindows Mac OS Nikon Scan scan window will open on the desktop Choose the film typeType menu Choose a color model Click the Preview button Preview will be displayed in the preview area Adjust scan settings Rotate or flip the image Digital ICE Selecting the Entire Image Choose an output size and resolution Page Curves Page Image Windows Page Page 100 Turn the scanner off4000 ED Windows Me Scanning 35-mm Film 101 Film That Can Not Be Scanned in the SA-21 Film That Can Not Be Used102 Following film can not be scanned in the SA-21 Film That Must Be Repaired Before Use 103 See page 105 for information on using the FH-3 104 Using the FH-3 105Hold the adapter with the Nikon logo Face up 106 Unlatch the holder snaps and flipUpper holder open Place a strip of film in the lower por 107 Return the upper holder to its origiNal position, aligning the ends with 108 Align the frame you want to scan withEither of the two apertures see After confirming that the scanner is Using the Film Holder 109You want to scan into the MA-20 S This manual 110 Scanning Frames in Order Using the SA-21 111LED is not blinking, insert the SA-21 into the scanner Removing the Adapter 112 Inserting Film 113 Thumbnail Drawer Using the Thumbnail Drawer 114 115 Ejecting Film 116 117 Scan Window 120 Double-click the setup Windows or installer Macintosh icon 118To Step CD-ROM drive labeled Nikon Follow the on-screen instructions to complete installation 119 Scan Window Parts of the Scan Window120 121 Settings Menu Media Type Menu Control Area122 Eject Button Autofocus Button 123 Color Model Menu Window Buttons Orientation Dimensions/File Size Information Panel124 Image Enhancement Preview Button Thumbnail Drawer TabProcessed/Natural Tabs 125 Tool Chest 126Layout Tools Information Crop 127 Unsharp Mask Digital ICE cubedAnalog Gain Scan Progress Window 128 Reference 129 Troubleshooting 130 131 Status LED flashesTo computer Quality of scanned Images is poor 132 When Film Jams in the SA-21 If the Film Jams During Loading133 If the Film Is Not Ejected If the Film Jams Inside the Adapter 134SA-21 Locking Mechanism 135 Removing FilmUpper cover 136 Release the frame lock lever and open the roller frameAdapter Cover Maintenance Caring for Your Scanner137 Storing the Scanner Cleaning the Scanner 138Transporting the Scanner Original packing materials Cleaning the SA-21 Strip-Film Adapter Caring for Adapters139 Storing the SA-21 Strip-Film Adapter 140 141 142 Caring for the FH-3 Film HolderCaring for the MA-20 S Slide Mount Adapter Optional Accessories Options Available for the 4000 ED and Coolscan IV ED143 IA-20 S Adapter for APS IX240 Film Specifications Scanner Specifications144 145 146 147 Adapter Specifications 148 Specifications for Optional Adapters 149 Index 150