Nikon LS4000 user manual Accessories

En

Accessories

After unpacking the scanner, check that the package contains all the items listed below. Con- tact your retailer immediately should you find that anything is missing or damaged.

Power cable (1)

(shape of cable depends on country of sale)

MA-20 (S) slide-mount adapter (1)

Use this adapter to scan mounted slides, or with the FH-3 to scan strip film too short or too badly damaged to be used in the SA-21.

FH-3 strip-film holder for MA-20 (S) (1)

Place strip film to be scanned in this holder before scanning it with the MA-20 (S).

SA-21 strip-film adapter (1)

This adapter can be used to scan single or mul- tiple selected frames in film strips two to six frames in length. The frames to be scanned can be previewed and selected using Nikon Scan.

IEEE 1394/Firewire interface cable (1)

(4000 ED only)

Use this cable to connect the 4000 ED to your computer.

IEEE 1394/Firewire interface board (1)

(includes user’s manual)

(4000 ED only)

If you are using a Windows or old-model (beige) Macintosh G3 desktop computer, you may need to install this PCI board before you will be able to connect your scanner to your computer. This board can not be used with laptop computers or computers not equipped with a PCI slot, and is not required in the case of Macintosh com- puters with built-in Firewire ports.

USB interface cable (1) (COOLSCAN IV ED only)

Use this cable to connect the COOLSCAN IV ED to your computer.

4