Step 1—Ready the Slide

The MA-20 (S) slide-mount adapter is used to scan 35-mm film mounted as slides.

35-mm slide

Step 2—Insert the Adapter

After confirming that the scanner is ready (the scanner is ready when the status LED is not blinking), insert the MA-20 (S) slide-mount adapter into the scanner.

Open the sliding cover on the front of the scanner and slide the MA-20 (S) smoothly into the adapter slot until it is fully inserted. The status LED will blink a few times and then glow steadily.

84

Page 94
Image 94
Nikon LS4000 user manual Ready the Slide, Insert the Adapter