Paradyne 3165-A2, 3164-A2, 3160-A3, 3161-B3 manual StEvnt, Complete

4. Maintenance

Table 4-3. Performance Registers (2 of 2)

Register	Interval Description	Totals Description
LOFC	The loss of frame count for the	The total loss of frame count for the
	current interval. This is a count of	previous x hours, where x is
	the number of times that an LOF is	24 hours for aggregate performance
	declared. The maximum count is	and 8 hours for port performance.
	255.
CSS	The number of controlled slip	The total number of controlled slip
(Not valid	seconds for the current interval.	seconds for the previous x hours,
for Port		where x is 24 hours for aggregate
registers.)		performance and 8 hours for port
		performance.
StEvnt	The status events register records	N/A
(Only valid	whether one or more of the
for User	following events have occurred at
registers.)	least once during the interval. The
	event is identified by a letter as
	follows:
	Y – A Yellow Alarm signal has
	been received on the network
	interface.
	L – Loss Of Signal has occurred
	on the DTE Drop/Insert (DSX-1)
	interface.
	E – The Excessive Error Rate
	threshold has been exceeded.
	F – A Frame Synchronization Bit
	Error has been detected.
	V – A Bipolar Violation has been
	detected.
	If none of these events occurred
	during the interval, StEvnt=none
	will be displayed.
Complete	Bad line conditions or loopback	N/A
(Only valid	tests may prevent far-end port
for far-end	statistics from reaching the
port	DSU/CSU. This field indicates
registers.)	whether the 15-minute interval
	contains 900 seconds of statistics.
	If one or more seconds of far-end
	statistics are missing, this field will
	display Complete=No, otherwise it
	will display Complete=Yes. This
	field is only displayed when Far is
	selected from the Prtn screen.

4-10 February 2001 3160-A2-GB21-90