Paradyne 3164-A2, 3165-A2, 3160-A3, 3161-B3 manual EditDTE Port NET Chan

3. Operation

Procedure

To select the data port:

1.From the top-level menu screen, select Cnfig.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Select Edit.

4.From the Edit screen, press the key until the Chan selection appears on the screen.

5.Select Chan.

Edit:DTE

Port NET Chan

F1 F2 F3

6.From the Channel Config screen, press the key to scroll the ports onto the screen.

7.Select the desired port by pressing its corresponding Function key.

Channel Config:

Prt1 Prt2 Prt3

F1 F2 F3

8.The configuration option for the data port channel allocation destination appears on the screen. Select NET to assign this port to the network interface, select DTE to assign this port to the DTE Drop/Insert (DSX-1) interface, or

press the key and the appropriate Function key to assign this port to another port.

Assign To:NET

Next NET DTE

F1 F2 F3

9.Press F1 (Next) to display the appropriate configuration options on the screen. Use one of the following examples, depending on whether you are assigning by block, ACAMI, or individual channel.

3160-A2-GB21-90 February 2001 3-39