Paradyne 3160-A3, 3165-A2 manual Channel Configuration Options, Circuit Ident Next Edit Clear Prev

C. Configuration Options

Table C-3. Network Interface Configuration Options (3 of 3)

Circuit Ident:

Next Edit Clear Prev

Network Circuit Identifier. Specifies the transmission vendor’s circuit identifier for the purpose of facilitating troubleshooting. The network circuit identifier is an ASCII text string that may be up to 255 characters in length.

Edit – Allows you to edit and/or display the network circuit identifier using the generic text string entry screen.

Clear – Allows you to clear the network circuit identifier. The network circuit identifier is set to a null string.

Channel Configuration Options

he Channel configuration options are divided into two tables as follows:

TDTE Channel Configuration Options (Table C-4) Data Port Channel Configuration Options (Table C-5)

NOTE:

Table C-4, DTE Channel Configuration Options, and Table C-5, Data Port Channel Configuration Options, describe the DTE channel and data port channel configuration options. The configuration options in Table C-4, DTE Channel Configuration Options, only appear if the DTE Drop/Insert (DSX-1) port is enabled and you are using a 2-port or 4-port DSU/CSU.

C-10 February 2001 3160-A2-GB21-90