Paradyne 3161-B3, 3165-A2, 3164-A2, 3160-A3 manual Customer, Identification, Field

H. Asynchronous Terminal Operation

Setting Customer Identification

The customer identification is used to uniquely identify the DSU/CSU.

Procedure

To change the customer identification (Customer ID):

1. From the Main Menu screen, select Control.

The Control screen appears.

2. From the Control screen, select Customer ID.

The Customer ID screen appears (Figure H-3, Customer Identification

Screen).

3. Use the Customer ID field to set the customer identification.

The customer identification may be up to 8 characters long.

Select Clear to remove all the characters in the associated field.

4. Select Save to store the information in nonvolatile memory.

In addition to the customer identification, you may also enter a system name, system location, and system contact. Although only 40 characters are displayed for these fields, you may enter up to 255 characters. The fields scroll as the additional characters are added.

	main/control/customer id
Customer	Customer ID: Node A		Model: 31xx
Identification	Slot: xx
Field		CUSTOMER ID
	Customer ID:		Clear
	System Name:		Clear
	System Location:		Clear
	System Contact:		Clear

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu	MainMenu	Exit
Save

Figure H-3. Customer Identification Screen

3160-A2-GB21-90 February 2001 H-7