Manuals / Brands / Computer Equipment / Network Card / Paradyne / Computer Equipment / Network Card

Paradyne 3160-A3, 3161-B3, 3164-A2, 3165-A2 Table C-7. User Interface Configuration Options (8 of 10)

1 298

Download 298 pages, 3.02 Mb

C. Configuration Options

3160-A2-GB21-90 February 2001 C-25

Modem Type: Async

Next Async Sync Prev

Modem Type. Specifies whether the port uses synchronous or asynchronous

communication if the modem port is configured as the SNMP management link.

NOTES:

–This configuration option is available on standalone DSU/CSUs only. ●

–This confBiguration option is not available if the Modem Use configuration option is

set to ASCII. In this case, the modem port is always asynchronous.

Modem Rate: 2.4

Next 1.2 2.4 Prev

Modem Port Rate. Configures the bit rate for the modem port.

1.2 – Sets the bit rate at 1200 bps.

2.4 – Sets the bit rate at 2400 bps.

NOTE: This configuration option is available on standalone DSU/CSUs only. ●

MChar Len: 8

Next 7 8 Prev

Modem Character Length. Configures the character length (number of data bits) for the

modem port. This does not include the start bit (always 1) or the stop bits; 8 is the factory

default.

NOTES:

–This configuration option is available on standalone DSU/CSUs only. ●

–This option must be set to 8 to perform PC emulation or pas s-through operations, or

SNMP management.

MParity: None

Next None Even Odd Prev

Modem Parity. Configures the parity for the modem port. None is the factory default.

NOTE: This configuration option is available on standalone DSU/CSUs only. ●

MStop Bits: 1

Next 1 2 Prev

Modem Port Stop Bits. Configures the number of stop bits for the modem port; 1 is the

factory default.

NOTE: This configuration option is available on standalone DSU/CSUs only. ●

LSpaceDsc: Disab

Next Enab Disab Prev

Long Space Disconnect. Specifies how the modem disconnects a call. This makes call

disconnecting more robust and prevents invalid data at the remote modem if the call is

disconnected. To be effective, the remote modem must be configured to disconnect if it

detects continuous space.

NOTES:

–This configuration option is available on standalone DSU/CSUs only. ●

–This configuration option is not available if the modem port is configured as an

SNMP management link and the link is configured for synchronous operation.

Table C-7. User Interface Configuration Options (8 of 10)

Contents

Main A Copyright 2001 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice Warranty, Sales, Service, and Training Information Document Feedback Trade mar ks Important Safety Instructions Page Government Requirements and Equipment Return United States NOTICE TO USERS OF THE UNITED STATES TELEPHONE NETWORK 316x DSU/CSU Facility Interface Codes Code Description E Canada NOTICE TO USERS OF THE CANADIAN TELEPHONE NETWORK CAUTION: Contents About This Guide 1 Introduction 2 Installation ii 3 Operation 4 Maintenance iv A Front Panel Menu B Technical Specifications C Configuration Options D Pin Assignments E SNMP MIB Objects F IP Network Addressing Scenarios G Front Panel Emulation Page About This Guide Document Purpose and Intended Audience Document Summary Section Description viii Product-Related Documents Reference Documents Page Introduction Features 1-2 DTE Drop/Insert (DSX-1) Interface Alarm Message Capability Front Panel Emulation Integral Modem Async Terminal Interface Support Physical Description Standalone DSU/CSU Front Panel 1. Introduction 1-4 Figure 1-1. 3160 DSU/CSU Front Panel 496-14937 3164 Figure 1-2. 3164 DSU/CSU Front Panel Standalone DSU/CSU Rear Panel 1. Introduction CAUTION: 1-6 Figure 1-5. 3164 DSU/CSU Rear Panel Figure 1-6. 3165 DSU/CSU Rear Panel Table 1-1. Standalone DSU/CSU Rear Panel Connectors Name Function Page Installation ACCULINK 3151 CSU and 3161 DSU/CSU General Information Guide Application Examples 2-2 Figure 2-1. Point-to-Point Application Example SERVICES Figure 2-3. Fractional T1 Application Example Figure 2-2. Shared Access Application Example SNMP or Telnet Connection Examples 2-4 Figure 2-6. Connection through a LAN Adapter Figure 2-8. Remote Access through FDL/EDL Figure 2-7. LAN Adapter and Daisy Chaining Important Instructions Important Safety Instructions HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES Optional Power Sources Installing the Single 48 Vdc Power Supply Installing the Redundant 48 Vdc Power Supply 2-8 Cabling Examples T1 NETWORK Figure 2-12. Cabling Examples Pin Assignments Figure 2-12, Cabling Examples, illustrates some cabling examples. Power-Up Self-Test 2-10 xxxxxxxx Self-Test Health Operation ACCULINK 3151 CSU and 3161 DSU/CSU General Information Guide Using the Front Panel Front Panel Emulation 3-2 LCD Device Health and Status Keypad 3-4 Test Jac ks Test Jacks LEDs Selecting the DTE Drop/Insert or Data Port for LED Display 3-6 Table 3-1. System LEDs Table 3-2. Network Interface LEDs Page 3-8 Table 3-4. Data Port LEDs Displaying Unit Identity 3-10 Setting Customer Identification 3-12 Selecting the DTE Drop/Insert or Data Port for LED Display Displaying LED Conditions Front Panel Emulation 3-14 Changing Configuration Options Page 3-16 Displaying/Editing Configuration Options Saving Edit Changes 3-18 Selecting/Copying to a Specific Port Configuration from to Configuring the DSU/CSU for SNMP or Telnet Access IP Network Addressing Scenarios 3-20 Selecting the Port Setting the IP Address IP Network Addressing Scenarios xxx.xxx.xxx.xxx 3-22 000.000.000.000 Selecting the Link Layer Protocol Selecting the Port 3-24 Specifying the Community Name(s) and Access Type(s) Page 3-26 Configuring SNMP Traps SNMP Traps Enabling SNMP Trap Messages Selecting the Number of Trap Managers 3-28 Configuring a Destination for SNMP Traps 000.000.000.000 Setting the IP Address n Configuring DS0 Channels Allocating Data Ports 3. Operation 3-30 Figure 3-6. Example of Channel Allocation Figure 3-7. Example of Interface Worksheet for Network Interface Network Interface Network Channel Allocation 3-32 Figure 3-8. Example of Interface Worksheet for DTE Drop/Insert Interface DTE Drop/Insert (DSX-1) Interface DTE (DSX-1) Channel Allocation Figure 3-9. Example of RBS Information Worksheet DTE Chan Config Assign: (N1 24) Voice (RBS or Data) 3-34 Figure 3-10. Port Channel Configuration Worksheet (Ports 1 and 2) Port Chan Conf Options Value Figure 3-11. Port Channel Configuration Worksheet (Ports 3 and 4) Port Chan Conf Options Value 3-36 Displaying DS0 Channel Assignments Page 3-38 Allocating Data Ports Page 3-40 Block or ACAMI Assignment Method Individual Channel Assignment Method 3-42 Allocating DS0 Channels from the DTE Drop/Insert Interface to the Network Interface n. 3-44 Clearing DS0 Channel Allocation Providing Backup Capability Selecting the Timing Source Configuring for Network Timing Configuring for External Timing 3-46 Configuring for Network Timing Configuring for External Timing 3-48 Establishing Access Security on a Port Setting a Password Setting a Password Establishing Access Security on a Port 3-50 Entering a Password to Gain Access Setting a Password Acquiring/Releasing the User Interface 3-52 Acquiring the Active User Interface User I/F Releasing the Active User Interface 3-54 Enabling/Disabling the Front Panel Using the Integral Modem in Standalone DSU/CSUs User Interface Configuration Options Entering Numbers in the Phone Directories 3-56 Initiating a Call for Front Panel Pass-Through Operation 3-58 Initiating a Call for PC, ASCII Terminal/Printer, or SNMP Operation 3-60 Disconnecting the Modem Connection Enabling the Communication Port for Carrier-Mounted DSU/CSUs COMSPHERE 3000 Series Carrier Installation Manual 3-62 Table 3-7. Control Sequence Sequence ASCII HEX 3-64 Deactivating the Alarm Relay for Carrier-Mounted DSU/CSUs Resetting the DSU/CSU Download Operations Page User Interface Access Security for Standalone DSU/CSUs 3-68 Changing User Interface Access Security Maintenance Self-Test Health Installation 4-2 xxxxxxxx Table 4-1. Self-Test Health Messages Device Health and Status 4-4 Table 4-2. Device Health and Status Messages (1 of 2) xxxxxxxx Performance Reports 4-6 Page 4-8 Table 4-3. Performance Registers (1 of 2) Register Interval Description Totals Description 4-10 Table 4-3. Performance Registers (2 of 2) Register Interval Description Totals Description Alarms Displaying Unit Identity 4-12 Alarm Configuration Troubleshooting SNMP Traps Configuring SNMP Traps Page 4-14 Troubleshooting Table 4-6. Troubleshooting (2 of 3) Symptom Possible Cause Solutions 4-16 Tes t J ac ks 4-18 Figure 4-2. Test Jack Block Diagram Tabl e 4- 7. Tes t Ja ck F unct io ns Test Jac k Na me Fun cti on Test Commands Remote Loopback Tests 4-20 Sending a Line Loopback Up or Down Sending a V.54/ANSI FT1 Activation/Deactivation 4-22 Local Loopback Tests Starting a Line Loopback 4-24 Starting a Payload Loopback Starting a DTE Loopback 4-26 Starting a Repeater Loopback Starting a Data Channel Loopback 4-28 Starting a Data Terminal Loopback Aborting Loopbacks 4-30 Tes t P at t er ns Sending Test Patterns 4-32 Monitoring Test Patterns 4-34 Aborting Test Patterns Lamp Test Starting a Lamp Test 4-36 Aborting a Lamp Test Displaying DSU/CSU Test Status 4-38 Table 4-10. Test Status Message A 3160-A2-GB21-90 February 2001 A-1 Front Panel Menu Page B Technical Specif i cations Table B-1. Models 3160/3164/3165/DSU/CSUs Technical Specifications Specifications Criteria B-2 Table B-1. Models 3160/3164/3165/DSU/CSUs Technical Specifications Specifications Criteria C Configuration Options C-2 DTE Interface Configuration Options Port Configuration Options Table C-1. DTE Interface Configuration Options (2 of 2) Table C-2. Port Configuration Options (1 of 5) C-4 Table C-2. Port Configuration Options (2 of 5) Table C-2. Port Configuration Options (3 of 5) C-6 Table C-2. Port Configuration Options (4 of 5) Table C-2. Port Configuration Options (5 of 5) C-8 Network Interface Configuration Options Table C-3. Network Interface Configuration Options (1 of 3) Table C-3. Network Interface Configuration Options (2 of 3) C-10 Channel Configuration Options Table C-4. DTE Channel Configuration Options n, C-12 Table C-5. Data Port Channel Configuration Options (1 of 4) Operation Configuring DS0 Channels Table C-5. Data Port Channel Configuration Options (2 of 4) OR C-14 Table C-5. Data Port Channel Configuration Options (3 of 4) OR Table C-5. Data Port Channel Configuration Options (4 of 4) C-16 General Configuration Options Table C-6. General Configuration Options (1 of 2) Table C-6. General Configuration Options (2 of 2) C-18 User Interface Configuration Options Table C-7. User Interface Configuration Options (2 of 10) C-20 Table C-7. User Interface Configuration Options (3 of 10) Table C-7. User Interface Configuration Options (4 of 10) C-22 Table C-7. User Interface Configuration Options (5 of 10) X.X Table C-7. User Interface Configuration Options (6 of 10) C-24 Table C-7. User Interface Configuration Options (7 of 10) Table C-7. User Interface Configuration Options (8 of 10) C-26 Table C-7. User Interface Configuration Options (9 of 10) Table C-7. User Interface Configuration Options (10 of 10) C-28 Alarm Configuration Options Table C-8. Alarm Configuration Options (2 of 4) C-30 Table C-8. Alarm Configuration Options (3 of 4) Table C-8. Alarm Configuration Options (4 of 4) C-32 Management Configuration Options Table C-9. General Management Configuration Options (2 of 7) C-34 Table C-9. General Management Configuration Options (3 of 7) Table C-9. General Management Configuration Options (4 of 7) C-36 Table C-9. General Management Configuration Options (5 of 7) Table C-9. General Management Configuration Options (6 of 7) C-38 Table C-9. General Management Configuration Options (7 of 7) Table C-10. Management Trap Configuration Options (1 of 3) C-40 Table C-10. Management Trap Configuration Options (2 of 3) Table C-10. Management Trap Configuration Options (3 of 3) C-42 Configuration Worksheets User Options Value (Default in Bold) C-44 Prt1 Options Value (Default in Bold) Prt2 Options Value (Default in Bold) C-46 Prt3 Options Value (Default in Bold) Prt4 Options Value (Default in Bold) Network Interface Network Channel Allocation C-48 DTE Drop/Insert (DSX-1) Interface DTE (DSX-1) Channel Allocation DTE Chan Config Assign: (N1 24) Voice (RBS or Data) C-50 Conf Options Value (Default in Bold) C-52 General Mgmt Options Value (Default in Bold) Page Page D Pin Assignments Equipment List T1 Network Interface D-2 Figure D-1. T1 Line Interface Cable, RJ48C-to-RJ48C Figure D-2. T1 Line Interface Cable, RJ48C-to-DA15P DTE Drop/Insert Interface DTE Interface Configuration Options D-4 MODEM Port Interface AUX Port Interface D-6 COM Port Interface 3160-A2-GB21-90 February 2001 D-7 Figure D-5. COM Port-to-PC Cable Figure D-6. COM Port-to-Terminal/Printer Cable D-8 EIA-530-A Port Interface Connector Mnemonic ITU-T Number Direction Pin 3160-A2-GB21-90 February 2001 D-9 EIA-530-A-to-RS-449 Cable Interface Figure D-7. EIA-530-A-to-RS-449 Adapter D-10 Table D-8. RS-449 Cable Interface Signal Circuit Mnemonic ITU-T Number Direction Pin 3160-A2-GB21-90 February 2001 D-11 EIA-530-A-to-V.35 Cable Interface Figure D-8. EIA-530-A-to-V.35 Adapter D-12 Table D-9. V.35 Cable Interface Signal ITU-T Number Direction Pin EIA-530-A-to-X.21 Cable Interface D-14 Serial Crossover Cable Figure D-10. Serial Crossover Cable Power Input Connector Optional DC Power Cable Installation D-16 External Clock Interface E SNMP MIB Objects MIB II (RFC 1213) DS1/E1 MIB (RFC 1406) RS-232-like MIB (RFC 1317) MIB II (RFC 1213) System Group, MIB II E-4 Interface Group, MIB II Page E-6 Page E-8 Page E-10 IP Group, MIB II Page E-12 ICMP Group, MIB II TCP Group, MIB II UDP Group, MIB II Transmission Group, MIB II E-14 DS1/E1 MIB (RFC 1406) Near End Group, DS1/E1 MIB Page E-16 Page E-18 Far End Group, DS1/E1 MIB DS1 Fractional Group, DS1/E1 MIB RS-232-like MIB (RFC 1317) E-20 General Port Table, RS-232-like MIB Page E-22 Asynchronous Port Table, RS-232-like MIB Synchronous Port Table, RS-232-like MIB Input Signal Table, RS-232-like MIB E-24 Output Signal Table, RS-232-like MIB Generic-Interface MIB Extensions (RFC 1229) Generic Interface Test Table, Generic Interface MIB E-26 Enterprise MIB E. SNMP MIB Objects E-28 Correlation between Menu Commands and SNMP Objects values for SNMP objects are displayed in italics. Table E-1. SNMP MIB to Front Panel Command Cross-Reference (1 of 3) E-30 Table E-1. SNMP MIB to Front Panel Command Cross-Reference (2 of 3) Table E-1. SNMP MIB to Front Panel Command Cross-Reference (3 of 3) Page F IP Network Addressing Scenarios F-2 Scenario 1 Scenario 2 F. IP Network Addressing Scenarios F-4 Scenario 3 Figure F-3. Local Carrier Connected to Remote Carriers 135.18.6.1 . . . . 135.18.6.16 135.18.20.1 . . . . 135.18.20.16 135.18.4.1 . . . . 135.18.4.16 Scenario 4 Figure F-4. Local Carrier Connected to Remote Carriers an Alternative 135.19.6.1 . . . . 135.19.6.16 135.19.20.1 . . . . 135.19.20.16 135.19.1.1 . . . . 135.19.1.16 Scenario 5 G Front Panel Emulation ACCULINK 3151 CSU and 3161 DSU/CSU General Information Guide Installing Front Panel Emulation Software G-2 Starting Front Panel Emulation G-4 Displaying LED Conditions H Asynchronous Terminal Operation Before Using the Asynchronous Terminal Changing Configuration Initiating an Asynchronous Terminal Session IP Network Addressing Scenarios Entering a Password to Gain Access Ending an Asynchronous Terminal Session H-4 Menu Organization Figure H-2. Menu Organization Using Asynchronous Terminal Screens H-6 NOTES: Setting Customer Identification H-8 Displaying LED Conditions Changing Configuration Options Changing Configuration Options Displaying or Editing Configuration Options H-10 Saving Edit Changes H-12 Establishing Access Security on a Port Setting a Password Setting a Password Establishing Access Security on a Port H-14 Entering a Password to Gain Access If the password is valid If the password is invalid If an invalid password is entered three consecutive times Configuration Worksheets for the Asynchronous Terminal Interface H-16 Sync Data Port Options (Port 1) Front Panel Equivalent Value (Default in Bold) Sync Data Port Options (Port 2) Front Panel Equivalent Value (Default in Bold) H-18 Sync Data Port Options (Port 3) Front Panel Equivalent Value (Default in Bold) Sync Data Port Options (Port 4) Front Panel Equivalent Value (Default in Bold) H-20 User Interface: External Device Options Front Panel Equivalent Value (Default in Bold) User Interface: Telnet Sessions Options Front Panel Equivalent Value (Default in Bold) User Interface: Internal Modem Options Front Panel Equivalent Value (Default in Bold) H-22 User Interface: Auxiliary Port Options Front Panel Equivalent Value (Default in Bold) Alarm and Trap Options Front Panel Equivalent Value (Default in Bold) Page Page I Equipment List and the Cable numbers for the 3161 DSU/CSU are located in the ACCULINK 3151 CSU and 3161 DSU/CSU General Information Guide Page Glossary GL-2 Page GL-4 Page GL-6 Page GL-8 Page GL-10 Index A B C IN-2 D E F G I K L M N O P Q R S IN-6 T U V W X