Paradyne 3164-A2, 3165-A2, 3160-A3, 3161-B3 manual Configuring the DSU/CSU for Snmp or Telnet Access

3. Operation

Procedure

To copy the configuration options to one or all ports:

1. From the Port Select screen, select Copy.

Port Select:

Copy Prt1 Prt2

F1 F2 F3

2.Select the port from which you want to copy the configuration options using the corresponding Function key.

Copy From:

Prt1 Prt2 Prt3

F1 F2 F3

3.Select the port to which you want to copy the configuration options using the corresponding Function key. Or, press F1 (All) to choose to copy to all ports.

Copy To:

All Prt1 Prt2

F1 F2 F3

Configuring the DSU/CSU for SNMP or Telnet Access

o configure the DSU/CSU for SNMP or Telnet access:

Enable the SNMP agent or Telnet server within the DSU/CSU (see

Appendix C, Configuration Options).

Select and configure the port that provides the link to the SNMP or Telnet system.

Set the Internet Protocol (IP) address and subnet mask needed to access the

DSU/CSU (see Appendix F, IP Network Addressing Scenarios).

Select the link layer protocol (PPP or SLIP) for the port that provides the link to the SNMP or Telnet system.

For SNMP links, specify the two community names (and their access levels) that are allowed to access the device’s Management Information Base (MIB).

For SNMP links, configure the device to send traps to the SNMP manager, if

Tdesired.

Specify the Telnet password or SNMP validation options, if desired (see Appendix C, Configuration Options).

3160-A2-GB21-90 February 2001 3-19