C. Configuration Options

Management Configuration Options

The Management configuration options configure the DSU/CSU for SNMP or Telnet access (Table C-9, General Management Configuration Options, and Table C-10, Management Trap Configuration Options).

The configuration tables include a description of each configuration function and its available selections. In the tables, the top line of each configuration option entry indicates the factory default setting.

DTE Interface Configuration Options

NOTE:

These configuration options are only available for 2-port and 4-port

DSU/CSUs.

Table C-1. DTE Interface Configuration Options (1 of 2)

DTE Port: Enab

Next Enab Disab Prev

DTE Drop/Insert (DSX-1) Port. Enables the use of the DTE Drop/Insert (DSX-1) port.

Enab – Allows the use of the DTE Drop/Insert (DSX-1) interface.

Disab – Prohibits the use of the DTE Drop/Insert (DSX-1) interface.

NOTE: When this configuration option is disabled, you cannot display or configure any other DTE Interface configuration options. If the clock source configuration option is set to DTE, it is changed to NET.

DTE Framing: ESF (Factory 1) D4 (Factory 2)

Next D4 ESF Prev

DTE Line Framing Format. Designates the framing format for the DTE Drop/Insert (DSX-1) interface.

D4 – Configures for the D4 framing format.

ESF – Configures for the Extended Superframe framing format.

DTE Coding: B8ZS (Factory 1) AMI (Factory 2)

Next AMI B8ZS Prev

DTE Line Coding Format. Designates the line coding format to be used on the DTE

Drop/Insert (DSX-1) interface.

AMI – Uses the Alternate Mark Inversion coding format.

B8ZS – Uses the Bipolar 8 Zero Suppression coding format.

Equal: 0—133

Next 0—133 133—266 266—399 399 —533 533 —655 Prev

DTE Line Equalization. Specifies the DTE line equalization compensation parameters that permit a standard DTE Drop/Insert (DSX-1) signal to be delivered over a distance of up to 655 feet.

C-2

February 2001

3160-A2-GB21-90

Page 146
Image 146
Paradyne 3160-A3, 3165-A2, 3164-A2, 3161-B3 manual DTE Interface Configuration Options, Management Configuration Options