Paradyne 3164-A2, 3165-A2, 3160-A3, 3161-B3 manual Figure H-9. Setting a Password

H. Asynchronous Terminal Operation

Setting a Password

In addition to establishing access security on a port (refer to the previous section, Establishing Access Security on a Port on page H-12),the password itself is set. Unless you specify otherwise, the password is null.

Procedure

To set a password:

1.From the Main Menu screen, select Control. The Control screen appears.

2.From the Control screen, select Administer Password.

The Password Entry screen appears (Figure H-9, Setting a Password). This screen is used to add a new password or modify an existing password.

3.Enter a new password in the Password field.

The password may be 1 to 8 characters long and may contain the characters 0 through 9, a through z, and/or A through Z.

4.Use the Re-Enter Password field to verify the new password.

5.Select Save.

Once a password is saved, the Login Records Saved message appears at the bottom of the screen.

main/control/admin_password
Customer ID: Node A	Model: 31xx
Slot: xx	Enter New
	Password
	PASSWORD ENTRY

Password:

Re-Enter Password:

Save

Password

Re-enter Password

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Figure H-9. Setting a Password

3160-A2-GB21-90 February 2001 H-13