Paradyne 3160-A3, 3165-A2, 3164-A2, 3161-B3 Table C-9. General Management Configuration Options 3

C. Configuration Options

Table C-9. General Management Configuration Options (3 of 7)

Access 1: Read

Next Read R/W Prev

Access 1. Specifies the type of access allowed for Community Name 1. This is the type of access allowed for external SNMP managers accessing objects in the MIB using Community Name 1.

Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for this device when community name 1 is used. This includes all objects specified as either read-only or read/write in the MIB RFCs.

R/W – Allows read and write access (SNMP Get and Set) to the objects in the MIB for this device when community name 1 is used. Write access is allowed for all objects specified as read/write in the MIB RFCs. Read access is allowed for all objects specified as either read-only or read/write.

CommunityName2:

Next Edit Clear Prev

Community Name 2. Specifies the second of two community names that are allowed to access this unit’s Management Information Base (MIB). External SNMP managers must supply this name to access an object in the MIB.

Edit – Allows you to edit or display the second community name.

Clear – Allows you to clear the second community name.

Access 2: Read

Next Read R/W Prev

Access 2. Specifies the type of access allowed for Community Name 2. This is the type of access allowed for external SNMP managers accessing objects in the MIB using Community Name 2.

Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for this device when community name 2 is used. This includes all objects specified as either read-only or read/write in the MIB RFCs.

R/W – Allows read and write access (SNMP Get and Set) to the objects in the MIB for this device when community name 2 is used. Write access is allowed for all objects specified as read/write in the MIB RFCs. Read access is allowed for all objects specified as either read-only or read/write.

IP Adr:

Next Edit Clear Prev

IP Address for the DSU/CSU. Specifies the IP address needed to access the DSU/CSU. Since this IP Address is not bound to a particular port, it can be used for remote access via the FDL or EDL (for 2-port and 4-port DSU/CSUs) management link.

Edit – Allows you to edit and/or display the IP address for the DSU/CSU.

Clear – Allows you to clear the IP address for the DSU/CSU. The IP address is set to 000.000.000.000.

C-34 February 2001 3160-A2-GB21-90